Swiss Diamond stopped using PFOA for their non-stick in 2008 and has an induction capable line. I use an Ikea 365+ Teflon pan for eggs and keep the heat low to medium. Teflon doesn't use PFOA, either. Heating these pans beyond 500 degrees can cause awful fumes to be created. But, there's no reason to get even remotely close to that temp with these pans. The teflon coating is non-reactive with other chemicals. For searing, cast iron is a good option. A well-developed seasoning can make them non-stick. I use one of these, as well. Seasoned carbon steel (ex. DeBuyer) is also non-stick and an excellent quick cooking vessel. Very responsive. I have no experience with ceramic pans.

Oh, for frittatas! That's different! I've never had a non-stick pan that I liked, so was just reading along for information. I've been on an omelette kick recently. It started as experiments with my DeBuyer carbon steel crepe pans. I didn't think I'd like them for eggs because I have a tendency to wiggle them around in the pan and have the best luck with enamel for that (i.e., there's residue, but the eggs still come out, by and large). People were talking in Appliances about using them for breakfasts, and I didn't think they'd be good for eggs in a fry-up. Sure enough, I tried it, and it could have been worse, but the Le Creuset is a lot better. On the other hand, in doing an experiment regarding my induction, when I was feeling horrid and was looking for a soothing greaseball to eat, I made a grilled egg sandwich using a crepe pan for grilling the sandwich and my blini pan for the egg. That is the best sunnyside up egg I've ever made! It was done in butter, but was totally slidy. Into the sandwich without utensil intervention just like the non-sticks do on TV, same for the sandwich itself, even with the contents running all over the pan. So for grins I tried the crepe pans for omelettes and they're great! Best omelettes I've ever made too. The folding has always been my downfall. The low sides and really really smooth surface make it really easy to get the spatula underneath and flip it over. Also, the sharp angle makes for perfectly round eggs, which looks really cool. :) The only downside is that they don't have lids, and the ones I've been using are only a so-so fit. Getting it done just right on the top is a challenge. Really beautiful omelettes, however. I haven't done it yet, but it occurred to me that it would be really easy to make a frittata by starting it in the one pan and heating the next size up one to flip it into. They make double sided frittata pans to do just that. I wouldn't put these in the dishwasher, but cleaning is just so easy! Right after plating, I run the pan under hot water with a drop of dish liquid, give it a swish with a plant fiber scrubbie if necessary, rinse, pat with towel and put back on the warm element to thoroughly dry. Sounds like a lot, but takes less than 15 seconds. If it looks like it needs it, I'll give it a quick spray of oil for the seasoning too. If it hadn't been for that discussion in Appliances, I'd still be using these mostly for socca, blintz pancakes and other crepeish things. Because they're so smooth--smoother even than enamel--I think they're great for anything one might do on a flattop, as long is it doesn't get scrambled or slosh out of the pan.

We also got Emeril cookware for the induction top. I really like it...it has drain holes in the lids and the lids are clear so you can see how something is simmering or boiling without removing the lid. They are also reasonably quiet...some pots can be noisy on induction. Of course the best for induction is cast iron...either plain or enameled. Just make sure there aren't any burrs on the bottom of the pans or they may scratch the cooktop.

brickeyee Not to discredit you or anything but maybe you should read the attached link before you make such a blanket statement (and yes, I have Teflon coated non stick pans that I use) or this site http://www.torayfluorofibers.com/TEFLONADVANTAGE/ProductSafetyInfo/tabid/60/Default.aspx where, and I quote, Do not use TFA materials in medical applications involving permanent implantation in the human body or permanent contact with internal body fluids or tissues. Do not use TFA materials in medical applications involving brief or temporary implantation in the human body or contact with internal body fluids or tissues, unless the material has been provided directly from TFA under a contract which expressly acknowledges the contemplated use. TFA makes no representation, promise, express warranty or implied warranty concerning the suitability of these materials for use in implantation in the human body or in contact with internal body fluids or tissues. The content of TFA material is not certified for implants. TFA materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. TFA has not performed clinical testing of these materials for implantation. TFA will not provide to customers making implantable devices any notice concerning its materials, as specified under 21 C.F.R. section 820.81, or any other information necessary for medical device use of the materials under any other statute or FDA regulation. TFA has neither sought, nor received, approval from the FDA for the use of these materials in implantation in the human body or in contact with internal body fluids or tissues. Do not make reference to the TFA name or any TFA trademark in association with an implantable medical device. Do not use a TFA trademark as the descriptive name of an implantable medical device (e.g., do not call it the "TEFLON® prosthesis"). All implantable medical devices carry a risk of failure and adverse consequences. Regarding implantation of materials, you should rely upon the medical judgment of the physician, the medical device seller, and the FDA. Do not rely upon TFA. Examples of both harmful consequences and lifesaving benefits from the implantation of various materials can be found in published medical articles. Without performing clinical medical studies of an implantable medical device, TFA cannot weigh the benefits against the risks of that device and cannot offer a medical judgment on the safety or efficacy of the use of our material in that device. color="red"> Regardless, once teflon coatings begin to peel, the chemical is breaking down and many authorities more versed in toxicity than I are recommending to toss that pan asap. Here is a link that might be useful: EPA Risk assesment EPA Draft Risk Assesment of teflon and it's by products