@Hugo Beltran: "Item was delivered and it is not operational. Ikea expects you to deliver it back to the store at your own cost and inconvenience." The warranty clearly states that "The limited warranty will pay for factory specified parts and repair labor to correct defects in materials or workmanship that existed when the major appliance was purchased." and "Pickup and delivery. This major appliance is intended to be repaired in your home." -- IKEA Limited Warranties

The website works fine for me now... Sounds like maybe they just forgot to renew the domain name or something?

The delayed ignition for the stove-top burners is an easy adjustment. In the vast majority of cases, you simply need to bend the spark igniter back into the proper position. If your range is still under warranty, I would have service technician do it. While not difficult per se, there is a small chance that you could crack the ceramic insulator in the process. Better have somebody else be responsible, if that happens. If it no longer is under warranty, get some locking pliers, grip the top part of the igniter and very gently move it into a better position. This might require some trial and error, but if the burner doesn't ignite within three clicks, you know that you are not done yet. Oh, and if you do break the igniter, don't panic. They are cheap and if you ask nicely,, your dealer (or Bluestar) might just give you a handful of them for free. The biggest pain is unscrewing them from the burner head, if the stove has already been in use for a couple of years. The screw tends to seize up over time (and if it isn't firmly fastened, the igniter won't click at all; so do make sure it has a solid electric connection). Can't really tell you much about the temperature swings for the oven. I don't see those with my oven, and the installer did actually verify the oven's performance with a thermometer. My only comment would be that running the convection fan is likely to reduce uneven temperatures. But the 50-70 incorrect top temperature is easily adjustable. Pull off the oven's control nob. In the center of the axle, you'll find a tiny screw. Turn it adjust the setpoint for the thermostat. Again, this is something the installer really should have verified for you. And once it is set, it shouldn't really need additional adjustments.

I just ordered fabric samples from CarolinaChair.com. There a few reviews for them here on Gardenweb. All reviews are great. Styles are limited but they do custom work for an upcharge. I ordered the samples on Thursday and I received an email confirming my request and another email to advise they mailed the samples yesterday. I'll give some feedback when I receive the samples.