Cabinets made in Ca when made legally are to be finished with water based paint and stain products. The cabinets made in South Dakota like Starmark and Showplace are oil based catalyzed varnishes which are much more durable. If you want to test it. Ask to have a sample from both places. Put acetone on the finish and wipe it off. If it is water based the finish will dissolve to some degree during the wipe. The oil based finish will look un touched. The La area store of Ca I work does not offer locally made cabinets for this reason. If you want to buy oil based floor stain or poly urethane you have to drive to San Diego county just to purchase it... The basic premise of the what the dealer told you is correct... The acetone test will tell you if you will get a inferior finish from the local company... I have heard of one company that made cabinets for a project I bid and did not get where the local cabinet maker bought oil based finish in pints to have it shipped in from out of state. You would have to mix all them together I would think it get an even finish color... The national cabinet makers use the oven and the catalyst to be able to finish their products faster. The upside is most also add an hardener to the finish that cures with the oven making the finish more resistant to light scratches and other wear and tear.. I have spoken with many people who have locally made cabinets where the area around the knobs and pulls discolors over time from the oils in the skin from being touched. The out of state finish is likely to be more durable from a reputable company in South Dakota.

We used cliqstudios cabinets in 3 projects in our last house. 2 were stained wood, 1 was the painted wood (linen). The painted cabinets withstood 2 children coloring on them with non washable crayons, colored pencil, 3 cats who loved to rub their faces on the corners and a very VERY busy work area. After pricing the cliqstudios cabinets, the same kitchen in IKEA, and KountryWood Products (available through a local dealer), we've decided to go with cliqstudios again. The prices were exactly the same, IKEA doesn't come with plywood sides, they were only available as an upgrade on the KWP's and they come standard on the cliqstudios cabinets. Plus, I don't have to build the cliqstudios cabinets. As for the finished - my parents went with a VERY high end custom cabinetry company (apologies, I don't remember the name) - white painted inset shaker style - the finish on their cabinets started looking like crap within 5 years. Places where the cabinet finish has chipped, or flaked off, discoloration, etc.

There are a lot of factors that go into pricing that may be pushing the cost higher than anticipated. For instance, base cabinets with 3-4 drawers are typically more expensive than a standard base cabinet with 1 drawer over 2 doors. Extra details such as corbels, columns, interior rollouts, cutlery dividers, specialty hardware, etc. will all have a direct effect on the price. I would suggest getting a few quotes to compare prices. You may be able to afford a higher quality custom cabinet, depending on the size and configuration of your kitchen!

For a spec home, the builder/developer typically writes their own generic list of specs and allowances for the project to build a plan that they have selected. This helps ensure they are able to control the building costs and process through their chosen team with as little input from the client as possible. A spec house builder proposes what they think you will want in the home and will usually make simple change order adjustments up or down based on your selections during the project. As a custom builder, I can tell you that simple process doesn’t cut it for most custom home building projects. Custom homes begin with the vision of the client and architect as a collaborative effort. The architect usually provides an extremely detailed set of building plans and an accompanying set of building specifications for each project. It’s best for the Owner to have selected their Builder early in the design process so that we may review the evolution of the project and suggest ways to control the budget. We have had a number of clients over the years who called in a panic after the plans were complete and they began receiving their first bids on the project from other builders that far exceeded the budget. They were painted into a corner without knowing how much the project would cost. Good architects help eliminate that problem early. Anyway, our job as a custom builder is to review all the plans and specs and develop a list of any problems we see that need to be addressed as well as evaluate the allowance values that are sometimes established by the architect during the bid process. Our job is to evaluate someone’s vision and assemble all of the details to make it happen. After a series of lengthy planning meetings between Owner and Builder before the contract is signed, we hash out as many potential selections, upgrades, value savings deducts as possible and then use the architects specs as a guideline to create our own contract set of specs for the owner. This process of getting to know the client is what defines most custom builders. The more we know about the client, what inspires them, their trigger points which may affect the project, the better. And when it comes time to build the home, every detail has to be perfect and the client owns your schedule until the home is done. We charge more because custom homes take up way more time than spec homes. As for allowances, we provide allowances for things like tile, flooring, cabinetry, countertops, appliances, water wells, etc. The appliance allowance includes a quote from our preferred vendor with all model numbers. When the time comes for the client to pick out certain products, they know the budget, and they are welcome to shop as many vendors as they wish. My time is included to help with coordination if they chose my preferred vendor. I charge extra for additional coordination time to evaluate multiple vendors because that process requires much more time. I hope this helps. Every builder has their own method that works for them. This is just how we approach the process. Best of luck!