I have two very large Dimensions Kits. My wrists hurt to say the least. Can a sewing machine complete these large kits? If so, what particular machines and attachments? Otherwise, I will have to give them away.

Closed view Image link:

I used the pivot method in the Youtube video I linked to modify the front pattern piece - I don't think it's going to fit on the fabric, going to have to cut a new piece. The edge of the new armhole ends up right in the selvedge, and with only 3/8" SA I think the little holes are going to show. Plus since the narrowest point is 25" from the selvedge and I refolded to 12.5", the edge of the hem is right AT the edge of the selvedge, which is 1/2" deep so I know some holes are going to show there, unless we make it shorter. Well, then again, the hem is 1.25" deep (double the 3/8") so maybe that will be folded up into the hem and the part that actually shows will be OK. I don't know, I've got other things to worry about now. DH decided to help me this weekend by getting the deer/rabbit netting up around the garden (permanently installed T posts with ENT conduit extensions to 7ft). But he trenched 3 sides and filled in with bark mulch, I think to try to keep weeds from creeping in (he just didn't do the side where my strawberries are creeping in, so I can move them). Now the plastic pegs that hold the bottom of the netting don't have anything solid to hold onto, we're going to have to lower the netting and lay it out farther from the posts onto solid ground. I'm afraid that trench is also going to fill with water and become a breeding ground for mosquitos (maybe they won't like the bark mulch?). We'll see tomorrow - supposed to get 1" of rain tonight. But I think he's going to have to extend the trench to the lowest point and let it all drain into the (already swampy) low point in the back yard. But I can't say anything until after my fears are proven correct, b/c any time I question something he's done and suggest a modification, he "undoes" what he did (sometimes making the matter worse) and then ignores my requests for other projects. He built a 3ft high stone circle around our wellhead a few years ago for Mothers Day, it was lovely, but when I expressed concern that our (then) young child and cousins could get hurt climbing on it b/c it wasn't mortared, he tore it apart, never rebuilt it, and has ignored my requests to build a 1ft tall stone wall under our porch, while proceeding to build a 50-ft long retaining wall in the back yard to the south of the vegetable garden.

I don't know what bone would feel like, Linda, but they may well be. I thought celluloid was fragile and the instruments are solid. The needle case screws together. Would bone be treated to do that? What would the pointed thingie be for? It wouldn't be strong or sharp enough to punch leather like the awl is. Is it a little travel kit? I'm really curious. It's a pretty little thing and from some of the flowers being worn off, it must have been used. Lori, my DH would do the same if he thought he could use it in any way, but he's not getting his mitts on this little guy!