For some reason, I just cannot fall in love with Firefox, even though I have had it on my computers through various versions including 3.5. And IE is absolutely so slow, even v.8 that I use it only when I have to. I keep going back to Opera since I have never had the problems that others have had with GW. I do use Chrome to view a few websites, just because I like to keep it up to date. It's nice and fast and both it and Opera are not loaded down with a bunch of add-ons---just not necessary.

In my limited experience, 3G is often problematic. It's best not to use it unless you must, like in the car, or for those features which only work on 3G. It also saves you bandwidth to use wifi when available. It's possible that your 3G was running slow and timing out before the information made it to the site. Where I live, theoretically we have 3G on all networks and 4G on some, but in reality we're usually on the Edge network or equivalent, which makes it more or less impossible to use it for anything more than text email.

Been there, done that...lint is such a HUGE annoyance to my life. We're in a 2nd floor condo where the dryer vent ducting goes to the roof through the attic over 20 feet and several elbows. My husband bought the condo years before we met, and the ducting was clogged after several years. At the time, he decided to disconnect the vent from the duct. The resulting moisture did some damage to the cabinetry (swelling of the particle board, even under layers of oil-based paint). Soon after we married, he decided we needed to fix the problem correctly. He went up into the attic and disassembled the ducting, brought it outside, and blew it out with his air compressor. I pushed some cleaning tool through it as well. We can't be doing this regularly! I mean preferably, never again! So, I had him put a filter -- a gallon paint strainer -- over the dryer vent where it connects to the machine. This clogs every month or so, we pull the machine out, disconnect the vent, clean the strainer, and put it back. This is still an annoying chore, but not the nightmare of dealing with the whole duct run. My husband had a cool idea, that what we need to do is sew a new, longer strainer that tapers to a skinny point, so that even when it clogs at the point, there can still be air flowing past the clogged strainer, and we should be able to go longer between cleanings. We got a new dryer last summer, and pulled the ducting out of the attic to clean it -- but it was already clean as a whistle. So, our secondary filter system has kept the duct run clean for 9 years. I found you can buy secondary lint traps with a door that opens to clean them out, but we don't have room to install the box in our laundry room, and I don't think it would work any better or be easier to clean than our homemade filter. When I redo the floor, I plan to put magic slider thingies under the dryer feet to make it easier to move in and out, plus I won't want to gouge my new floor. I have researched other solutions. People claim that solid metal vent will maintain better airflow than pleated, but I think it will still clog because we need 2 90-degree elbows to get it connected to the duct in the wall. And if it clogs, how do we pull out the machine with a non-stretching vent? If we could move the duct in the wall to match the dryer vent outlet, that would eliminate 2 elbows and would probably help... I also found you can install a secondary fan in the ducting near the exit, increasing the airspeed in long ducts so the lint won't clog. They cost $150-200, but if I never had to clean out the duct run or pull out the dryer to clean my makeshift secondary lint trap ever again, it would be well worth it. I also think that our ducting is leaky somewhere, because rooms on the other side of the wall (our master bath) get crusted with lint all the time. Finding and sealing those leaks would probably improve airspeed some, plus save me tons of work cleaning the lint all the time. I think the additional fan is the way to go. In 2 other areas where we replaced an ineffective low-cfm cheap fan with a high-cfm good one, like the hood over our cooktop, it made an amazing difference, night and day. Here is a link that might be useful: example of dryer duct fan

I tend to change as the mood strikes, usually once or twice a year. I have on that I like to use at Christmastime and other times, whatever I like to see. Ships, weather, nature are usually popular topics for me. Currently, I'm using the Arthur Anderson. One of the Great Lakes freighters and was the ship accompanying the Edmund Fitzgerald when the big Fitz went down. The Anderson was a matter of miles behind the Fitz so the history is interesting to me. I enjoy going to Duluth and watching the ships. Physics fascinates me. That tons of steel can float or fly is interesting to me.