Restoration Hardware's Parsons Reclaimed Russian Oak Table Care

11 years ago

Hello,

I'm looking at buying Restoration Hardware's Parsons Reclaimed Russian Oak Table (60") and had questions I'm hoping you friendly users can help with.

1) What can I put on the wood to protect it from spills/kids?

- I've read about Monocoat oil from another post, but it seems to darken the wood more than I would like. I want to keep it a greying/beige as much as possible while sufficiently protecting it.

2) Would a water based polyurethane coat work?

- Would it make for a too glossy of a coat?

- How should it be applied? Patting or brushing?

- How long would it lasts? I'm looking for something to last a long time, but understand if that's not a good option.

3) Does the wood vs coating matter?

4) Does anyone have pictures or reviews for this table? Or other Reclaimed Russian Oak products from RH?

- I saw it in person a few months ago, but now we are looking for a dining table and I remember liking it, but don't remember the exact color or gloss. I'll call around and take another look at it in person.

5) Alternatives? I really liked the proportions of this table vs other parsons like tables. And anything cheaper would be much appreciated. We are planning to buy sometime in Jan 2013, if we are able to save enough $.

Thank you all for your time and responses :)

Here is a link that might be useful: Restoration Hardware's Parsons Reclaimed Russian Oak

Featured Answer

Susan Lutte

5 years ago

I am getting ready to purchase a RH reclaimed 60" round Russian Oak table and plan to purchase a piece of glass to protect the top eating area of the table. This eliminates the worry of a spilled glass of wine, spaghetti sauce splatter, etc. It will cost approx $350 for that piece of mind, which I think will be well worth it in the long run.

Sort by:Oldest

Comments (16)

ctwoman
11 years ago
Did you ever buy this table? I'm looking for reviews and cannot find any! Thanks for any help!
bobismyuncle
11 years ago
I repair furniture, including some RH on warranty. Consumers have told me that RH tells them if they apply anything over the top, it voids their warranty. I don't know for sure, but I've heard this. I've also seen people who do "slap on some poly" and have been happy with their choice.

Any finish is going to alter the look of the wood. Cracks and weathering are never going to completely seal with a film finish.

There are three main purposes to applying a film finish:
- To beautify the wood
- To protect it from the elements (i.e., staining material, including water)
- To provide a cleanable surface

I always say these tables are just one spilled glass of red wine or red Kool-Aid, or escaping meatball away from a permanent stain.

As someone who's made a lot of furniture, I never see the appeal in the rustic nature of these pieces.
Related Discussions
Quality sofa from Restoration Hardware?
Q
Comments (38)
I have the Cambridge sofa in vintage black. After 3 years it was saggy on one side and had lost quite a bit of leather on the seating area so I contacted them and they replaced it. The new one looks better but they went from a 98" sofa to an 8ft one but when measuring it, it actually measures smaller than 8 ft. I also have noticed that when someone gets off it, the other person can feel it, almost like it's not level or build strong enough, it goes up and down. Hard to explain but we're small people. I actually preferred the saggy, missing leather to the new version. If you can find anywhere else to get what you want in a sofa, do it. Restoration Hardware may look pretty but it's not well made unfortunately.
...See More
Experience w/Restoration Hardware?????
Q
Comments (48)
Sadly, I have to agree that the customer service and delivery experience are both deplorable. Beautiful catalogs and showrooms - and nice people working in the stores - but after extremely rude delivery people, a missing chair, a demand that I sign that I'd received all items when I clearly hadn't, a screaming delivery person who told me I wasn't allowed to make notes on the invoice, I just needed to sign it, an online invoice that says I paid $2500 for an order that one link later says cost $500, non-existent customer service and the pages upon pages of negative reviews related to customer service and delivery, I will not order from RH again, no matter how beautiful their products look online and in print. I spent about $10,000 on outdoor and indoor items for a recent renovation. I'm happy with most of the items themselves, but after the headache, rudeness, flippant attitudes and untrackable orders, I've decided they don't really deserve any more money from me. There are so many other places to shop! I want to feel good about where I spend my money, and this whole experience has had the exact opposite effect. Strange when a company as well-branded as RH can't figure out the basics of e-commerce and customer experience.
...See More
What material is your kitchen table?
Q
Comments (21)
My kitchen table is antique QS oak. It's actually called a studio table as its a small square with leaves on both ends that slide out from underneath to form a small rectangle. My Dad bought it and refinished it for me when I went off to my college apartment 23 years ago. The finish is showing its age and will now show watermarks if a glass of ice water sits on it for too long. It needs to be stripped and refinished, but I'm not sure what it's future holds so I haven't done it. It won't be able to stay in our kitchen once we get the banquette made as it has regular legs in the corners instead of the center or a trestle-the arrangement, meaning the legs don't work in a banquette. Although I'd like to keep it to pass on to the kids someday as it is valuable and has sentimental meaning, I'm not sure we have space for it in the house. My DR table is QS oak. I bought it as an antique, but when they went to refinish it and make some new leaves for it they realized the top couldn't be saved. The legs are original, but the top and all the leaves were newly constructed. I assumed (won't do that again) that it would be finished like my kitchen table and didn't ask. It wasnt. They applied something on it that reminds me of poly. It's very protective and I don't get watermarks or stains, but it looks fake-ish to me compared to my other oak antiques. Here it is with most of the leaves in acting as my reno/GC desk in our temporary housing.
...See More
Quarter sawn oak-painted uppers yay or nay
Q
Comments (145)
North Iowa here.. What no one on this thread understands is there are no "green spaces" here. We have Habitat ReStore. We have Menard's or maybe Lowe's or Home Depot. Iowa people help each other all the time. Craig's list has junk. I did a kitchen gut 10+ years ago with Menard's hickory cabinets and laminate counters. No back splash. Existing Vinyl floor. Used my just fine white appliances. My house was built in 1880 so no open concept here. My kitchen is a room. A small room by comparison to almost all kitchens on here. I had a handyman who worked cheap. I had known him for at least 30 years so when I left for work I knew he'd deal with whatever came along. He was gone when I got home and I did clean up. I also did the gutting of the old kitchen; dead mice in the light fixture but he warned me about the potential so I was prepared. Maybe I was very, very lucky but I got a great kitchen for $10,000. I don't know what inflation would do to that price today. Compared to what I started with I now have a palace. You are a long way from final plans and I think you will do just fine. It takes a lot of price comparison shopping to get there. And shopping on eBay and Menard's sales. Don't over look the consignment shops. If you do Menard's cabinets wait until they have the 11% off. If you visit the cabinet people there regularly and tweak your layout, you will find people you really like and who like you and they will tell you when the sales are coming up. You can also make your own laminate counters for cheap. I didn't do that 4 inch backsplash thing and even though I didn't do any other kind of backsplash, I'm glad I didn't add it. Right now I have wallpaper but I'm thinking I might tile some paneling that's cut to fit so that if I get tired of it I can pull it off and put something else there.
...See More
thrifterindisguise
11 years ago
I didn't have this particular table, but I did get an RH table (grand balluster) and we ended up returning it entirely. On top of structural issues, I found it impossible to clean! And the salespeople were kinda sketchy about how to clean it when I asked, so I should have know better then.
thrifterindisguise
11 years ago
I didn't have this particular table, but I did get an RH table (grand balluster) and we ended up returning it entirely. On top of structural issues, I found it impossible to clean! And the salespeople were kinda sketchy about how to clean it when I asked, so I should have know better then.
ZimboD
9 years ago
Greetings justsomedude,

We have just received our table today and absolutely love it.

Did you coat the top with anything?
Any recommendations?

Cheers,
ZD
Jem
3 years ago
I just got this table- absolutely stunning. The pictures on the website don't do it justice. I got the natural color and it does seem to have protection- it's smooth with a shine- probably a wax. It's not as rustic as I thought it would be (which is awesome). I do have a kitchen table which was finished with a powder coat from a different company. It didn't have any finish on it. I did put a carnuba wax on that which has lasted over a year with twice a day wet wipe down. I have to say that the kitchen table looks better than when I got it. The patina is beautiful. it's the look that I was after. I think if you go for the rustic look then go with the rustic look. Don't fret. I know I was getting wrapped up in staining etc initially but it didn't happen and any little mark/blemish on it is from my family and from having loving memories around the table. Who wants to live a pristine sterile life? Not me. Enjoy your furniture don't keep it so precious. Be well everyone.
Cinnamonstick 11
3 years ago
Cinnamonstick 11
3 years ago
Cinnamonstick 11
3 years ago
last modified: 3 years ago
I also use Daddy Vans Wax on my Restoration. Reclaimed table. Also on my cement dining table. Works well. I would recommend the Restoration Hardware table to anyone! I think the natural oak is stunning however, I do wish I purchased the gray. I’ve had it for maybe 4 years and my style changed. Looks too warm for my current taste. Good luck! (Yes, aware this is a very old post but was searching around for information to possibly stain the table so had to add my two cents).

Love what Jem said!!! Spot on!
Cinnamonstick 11
3 years ago
Cinnamonstick 11
3 years ago
Great article. Haven’t tried anything by the Vans

https://julieblanner.com/restoration-hardware-table-nightmare/
Jem
3 years ago
Hi- have you considered bleaching it then applying a grey toned wax/stain? Alot of oaks lean into grey. not sure what kind of oak this table is. Love your kitchen!
Cinnamonstick 11
3 years ago
Thank you!

Wood bleach could be a great idea! So scary with the risk of ruining it. So pretty as is, just wish it was more gray or at least more muted orang/tan/brown. If we get more serious about tampering I would post for suggestions. Bleaching to lift the current color before adding back sounds like a smart way to go.
dahtzilanza
2 years ago
Anyone on here interested in selling their natural oak russian plank table??
Cinnamonstick 11
2 years ago
last modified: 2 years ago
Hi

We are keeping so far. Color is discontinued but they still make the table in three other shades. Keep an eye on Market Place. inhave seen several pop up in this color on there. Trick is to locate one for sale near you.

Good luck!

Restoration Hardware's Parsons Reclaimed Russian Oak Table Care

Susan Lutte

Comments (16)

ctwoman

bobismyuncle

Related Discussions

thrifterindisguise

thrifterindisguise

ZimboD

Jem

Cinnamonstick 11

Cinnamonstick 11

Cinnamonstick 11

Cinnamonstick 11

Cinnamonstick 11

Jem

Cinnamonstick 11

dahtzilanza

Cinnamonstick 11

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US