Bill, how much is labor generally? Is there a general range? I have a budget for tile, but it includes labor. I am trying to figure out how much of the budget is labor. Any help you could give me would be awesome.

I've looked at the fabrics. Fabrics are SO hard to choose, for a lot of reasons. One thing I learned when I was doing this for myself was to absolutely NOT select a fabric without seeing it in person first. They look completely different in person. You want to hold them up to furniture in the light of the room in which they will be. Light affects colors and fabrics dramatically. If you're doing this strictly online, you should be able to request swatches from Smith Bros. Better still, if there is a retailer near you yo can actually walk in and look at the large swatches and take some home, do so. Other considerations. Cleaning. It is my understanding (someone please correct me if I'm wrong) that the fabrics that are 100% man-made materials ,i.e.: polyester, acrylic, etc., are very hard to clean, that you want a fabric which at least has some cotton or wool or whatever in it. Also, you want to feel the fabrics so you'll have a sense of how comfortable it will be to sit on. Will if "feel" too cold in winter? That sort of thing. And wear: you don't want to have to reupholster the pieces in five years! Re: the fabrics you picked. Love, love, love 334211, the chair fabric. Beautiful. gorgeous colors, and it'll look stunning on that carpet. You absolutely can do the entire chair and ottoman in that fabric, and should, IMO. I love the chocolate brown/muted gray/blue color combo. Didn't particularly care for the second patterned fabric you chose for pillows, but that's just a matter of personal taste, of course. I do think the two patterns clash. re: the sofa fabric. I'm really not sure about it. It strikes me as being too dark for the carpet you've chosen, but it's hard to say w/o seeing a swatch in person. I think that with such a dark carpet, I'd want a bit more of a contrast. I think you're right, though, to go with a "railroad" pattern for the sofa, rather than jacquard or floral or whatever. I believe in being conservative with sofa fabrics (so they won't get dated and need to be recovered fairly quickly) and dressing sofas up instead with pillows and throws. Okay, I've gone through all the fabrics, matched them back and forth by using multiple windows, and this is what I came up with. For the sofa, purely by coincidence, I kept coming back to #329511, and it's the only one I settled on. It also has some cotton in it, which is good for sofa fabric. It'll look stunning on the dark brown carpet, and it goes very nicely with chair's 334211. The herringbone pattern gives it some texture, which you will like on a large piece like a sofa. For the sofa pillows, I love the Palm Island counter fabric, 334311 OR the same fabric you'll have for the chair, 334211. These fabrics contrasting with the richness and starkness of the deep brown rug will be gorgeous, in my opinion. but again, ALWAYS look at swatches in person before making a final decision. If you were to get a set of wood slat blinds for the two windows on each side of the fireplace, I think that would be the icing on the cake for that room (see link). Room with this color combo and these blinds would be warm enough in winter, cool enough for summer, serene…just beautiful, IMO. and why won't you use the wood-burning fireplace? Oh my! You must! Just remember to close the flue in the morning so your heat doesn't escape up the chimney! It's gonna be gorgeous, Carol! Here is a link that might be useful: Fireplace window blinds

Hi, The best I can help you with is this table of angles; you will find the compound settings for 135* wall angle in this table. Since you have no way of tilting the saw the other way, you will have to make 1 cut (maybe two) upside-down; to do this right you will need to shim the molding flat on the saw table with small rips of scrap material, so the molding doesn't tip. Casey Here is a link that might be useful: compound angle table for crown

It would be nice to see a layout of the area to be tiled and how the diagonal walls are related. We laid a large area of tile ourselves in our previous house in a lower level family room, hallway and bathroom. I believe the tile was a 16 inch square. We laid it on the diagonal and we had two very small walls flanking the entry that we angled to the rest of the room. The gas stove was also set on an angled platform. It looked great, but most of the walls were in square rooms. If a lot of your walls are diagonal, then your tile might end up perpendicular to most of the walls.