Ok I fixed the dam thing I bought a new coil and installed it and guess what "it did not work" funny thing eventhough I removeded the kill switch wire still no spark, I reset the gap of the coil around 10 thousands and it still did not work So I used a business card and set the gap I got spark, I re-installed the kill wire and you guess it no spark. I removed the fly wheel and fixed the kill switch and it all worked great. I am thinking I don't think the original coil was defective dam I spent $53 for the dam thing yes here in Canada we get it up the you know what for parts or anything elese we buy compared to US pricies. I did try the so-called defective coil on another 6-HP mower and it did not work. I can't believe I had a defective coil with defective kill switch ( grounded all the time) Some days it's best to stay home and watch TV.

Sue, sorry, I forgot details... New computer XP two hard drives lot's of every thing needed...Internet Explorer SP2 > On Cable...every thing else working. I don't have a different browser, don't want to change if I can help it. Been on Photobucket since they opened never had a problem like this. Another strange thing....if I post a picture from my photobucket, it shows, the URLs from Photobucket are working, just can't open the web site. Joy

Hi Jeff, You can send me a screen shot and I'll see if I can maybe help. I know P-bucket changed some things a while back and the link I had saved was in a different (not much liked) format, until a clicked on a link. I then saved that new link to my favorites. I hope others will also post, since I may not be of much or any help. I'll email you via GW since you have your setting to show email addy to NO ONE. If you don't get ir (as GW email has not been very reliable in the past) just drop me an email. You can see my email addy on the GW email form. Sue

Sorry, that should have been 1/2" not 1/4" seams. You're right, this may just have been the pattern - hard to tell how baggy the pants were supposed to be with the model wearing a longer top over them. The drawings didn't look that full. Pattern just says "use flame retardant fabrics" so not specifically for knits - how do you adjust a "woven" pattern for a knit? Stretch the knit as you cut? I measured crotch depth on some of DD's (fleece) pants and the size 5 pattern was only 1" more, those pants were getting a little small so I figured it would be OK for loose sweats. Didn't know how to measure crotch length, but took her pants, folded them in half with center back seam sticking out and it seemed to match the curve of the size 5 pretty well, she needs the room in the bum. The finished product just seemed to have too much fabric in the small of the back so I took it in with a dart. Same thing with the front. I have Simplicity Simply the Best book and looked at crotch depth and length adjustments, so I can measure DD and the pattern for next time (using flannel or fleece). But would you allow the 1.5" - 2" ease for a child? or less? And how would I measure the front? I can get overall crotch length, but DD needs that mainly in the bum, not the front or the lower back. So even if I made more than half the measurement in the back rather than splitting it evenly, how do I account for her booty/sway back? Thanks.