give us the make and model number of your wireless router and we can likely help you do it pretty easily, most of them it is a very simple task, just enter the address for the router set up in your browser go to the correct tab in the router for security and select WPA2 as the security you want to enable then you will definitely have to choose a name for the SSID because you want to change that and this is what everyone will see as your network name so you do not want to use your name or something that will let them know oh I see that is lpinkmountains network, you want to name it something random, you will also have to set a password or key so that anyone wanting to get on your wireless network will have to enter that key into the blank before they are allowed on, This is the key that must be made up of random letters and numbers most of the time it will generate one for you and you can accept that one but what I advise to people is to WRITE IT DOWN IMMEDIATELY and tape it to the bottom of the router! You should also definitely change the standard password for gaining entrance into the router it self so that only you have that password to be able to get in and change settings, you can add that to the one on the bottom of the router. Most routers do have the internal firewall enabled by default that is something you will want to check since you will be in the router settings it needs to be on. This is not the same as your software firewall you will find the software firewall in your windows security center. you should not need the software or cd for the router to do this. just give us the info on your router and someone will help you.

no you do not ever have to give anything server rights. the thing you MUST allow is generic 32 process that is what would stop you from being allowed access. You can open your zone alarm and click on the programs and change allowances or non allowances for each item there, if you did not give something permission that you want to have permission you can just click on the item there in the list and change your permissions, this link shows how to do that. Firewalls and ZoneAlarm Guide and Tips Next I would go download and install firefox browser and try using it and see if you can get it to access, right after you install it the zone alarm will ask if you want to give it server rights say no and to remember that, then it will pop up and ask do you want to allow firefox access to the internet say yes and check mark to remember that. That is all you have to do to have it set up for firefox to access the internet, it will not have to ask you again unless you do an update to your firefox program then it will ask again since the program has changed do the exact same steps as before. Firefox this will allow us to see if your problem lies with IE it self or elsewhere, if firefox works fine you at least have a good browser to use in the meantime. ZoneAlarm firewall - Tutorial read through this set of full tutorials with pictures.

should not make any difference the service pack. Many computers simply could not install sp3 but if you have done all windows updates you pretty much have the biggest part of sp3 from those regular updates. I would try to power down and power up in sequence to see if that helps. power off to everything, computers, modem, router, everything connected. Let sit 5 mins, then power up in this order modem first let it get fully lit up, power up router let it get fully lit up, power up computers let them fully load till all activity has stopped then try it. Do you have a firewall on it? if so it could be something in the firewall settings, but if the power sequence does not work I would just try a quick system restore to the date when it was all working fine that may reset what ever got changed.

Abreeze the best test is the one you have been doing since you installed Zonealarm. If you have had no known issues why would you change because of a test carried out by others? I read somewhere that those tests were on specific points. I have no idea where I read it nor did I search for more data. Zonealarm is possibly the most popular firewall out there. I used it for many years but had to swap because of a conflict I could not fix or I would still be with Zonealarm. Having said that, if you feel like a change then give Comodo a try, it is a good program. You will find that when a big Microsoft update occurs Comodo will ask you to validate each action that had been granted at some point in time. Not a big aggravation, especially if you look at it as a positive to help keep your machine clean