you could try those wooden shipping crates or reuse some wood from pallets and create your own.

That's a great idea.

Make sure you brace the barrel in the middle or make sure the rings are still on it because they staves(i think they are called) will all let go of each other with the motion/vibration of the chainsaw and the whole barrel will be ruined.

I made one from pallets, it seems to be working great so far not rotting yet, I have had it about 4 months ran one side of it for composting and I just waited to fill the other side with bedding until I was ready to harvest.

I am like you I only want the stuff that the worms will turn back into earth.

Alternatively, if you do end up messing your barrel up when you cut it you can just dig a whole in the ground and use the wood to make a type or worm tower.

If you have an in tact bourbon barrel, you can sell it for like 100 bucks. People pay good money for those things.

Thanks, All! I will let you know if I am able to start this reclaimed vermicompost bin. I already snagged a table top sitting out for garbage for one lid, and am sure I will come across another potential lid for the other alf hsoon. (By the way, Ian, I love the sound of a "worm tower!")
-Sam

The diversity and innovative ideas that spring from the minds of worm farmers sometimes remind me of the futility of sharing my experiences doing what we do.

But I'm not complaining because I think what we do we do because we have all that independent thought.... uh...... squirming around in our heads.

But sometimes a lot of the "revolutionary" ideas that spring from our creative minds only wind up confirming what becomes increasingly more evident each time those "wonder if" thoughts cause us to try to make worms more.........perfect.

What we keep learning is that the wormies do really great no matter what environment we put them into....as long as it doesn't include drowning, burning up, nuking, or using as fish bait.

So anyway, anytime I here about revolutionary techniques, or "new" methods, I just say....well, YEAH, I know that will work too. Because worms make it work.

If only we were as adaptable.

Chuckiebtoo

Hey All, here's an update on the project.

I found an old wine barrel that had been living under a deck and so had lost resale potential. We carefully halved it with a circular saw by holding the saw relatively still and rolling the barrel over the wheels on the bottom of a cart. This was around Apr 2014.

The staves stayed relatively tight for 6 months, but have since loosened a bit. I lined the insides of the bins with newspaper, partly to maintain moisture in the bin and partly to keep The Wormies inside. I also keep a few layers of newspaper and cardboard on top of the castings and water the paper itself once a week or so. If we go on a longer vacation, I have a worm sitter come over to wet them.

I put each half on bricks in a thick box or boot tray, but haven't experienced any leaking. Besides getting the hang of moisture maintenance, the only quirk in the system is that moths got in one bin for a short time. Turns out they just made it through the lid (wood propped on top, but not totally sealed) and not through the cardboard and paper into the worms' sanctuary, so it resolved quickly by me taking the lid off and removing the moths before they got too comfortable.

The Wormies seem really content. Thanks for your enthusiasm, All!

Sam