SHOP PRODUCTS
Houzz Logo Print
chelone_gw

Wanna make mud pies?

chelone
15 years ago

Today was the day. I skimcoated the chimney! I started at about 11 AM and finished the clean up around 3 PM.

{{gwi:187201}}
I did not have a mortar mixer or a paddle for the drill so I had to mix the stuff by hand. I mixed 25 lbs. of the finish at a time. Hard work!

{{gwi:187202}}
I ended up using the pointing trowel to load the trowel. I had the best luck with a smallish one that had a toothed edge. I applied the finish vertically and then "finished" it with more horizontal sweeps of a larger, smooth edged trowel. I found working up the sides easier than working down them.

The "thimble" (stove pipe goes on it) took some fussing:

{{gwi:187203}}
But the corners were harder. I ended up sort of gently patting the finish on and the using the wet pointing trowel to smooth them as best I could.

{{gwi:187204}}

Here is the chimney after I finished it:

{{gwi:187205}}

Here you are in the Salon looking directly north. The stair case is to your right:

{{gwi:187206}}

And here you are, looking directly south:

{{gwi:187207}}

That's all!

Comments (22)