THANKS for your thoughts!! (Hope this isn't going to weigh you down with information, but, here goes:) EXTENDING MASTER WING: We can bump out the end wall 4 feet max, improving (from 12' L) to 16' L (a bit longer on the deck side) x 20' W. (The opposite wing is 22' L x 20.5' W). SYMMETRY: To help reference the driveway approach towards the house: take the floor plan and literally rotate it about 45 degrees clockwise: that's the direction the driveway comes from (imagine an imaginary line continuing out from that 12' master bath sink/counter and shower). Essentially it will be like driving on the driveway towards the house, then veering a little left once you get to the house (like on the plan the words: "FIRST FLOOR/Scale 1/4"); then for a parking space: backing up onto what's left of the land outside the master wing bump out. (gosh I hope I'm explaining this ok) I am hoping the symmetry issue will be overlooked because one never really looks straight at the front door. (what d'ya think?) BED SIZE/PLACEMENT: King size bed(even though it takes up most of the space I know). We're hoping we have our choice of placing the bed either on that end wall or the bathroom wall, but probably the end wall. I am thinking that's a great idea to change the casement unit on the end wall to a horizontal band of rectangular/square windows along the top of the wall as you suggest! Sure would help with layout, huh? MBR DOOR: Never thought of moving a door over towards the exterior wall! It's an interesting thought. I WAS wondering, from a professionals point of view, if the MBR door was sort of TOO ~ not hidden enough? but figured the FP sorta blocks it a little. My only concern with this idea is that a desk area is one of those important requirements we have & don't necessarily want it in a bedroom. This will be a vacation home but I want a space for a computer and writing desk. I'll definitely consider moving it inward (towards the stairs) but need to also keep an aisle that's not too narrow. STAIRCASE PLACEMENT: We experimented with stairway placement everywhere it seems! We concluded that if the stairs weren't right there in the middle of the "Y", WHAT would be there then? Ultimately, we decided the staircase with the stone of the fireplace (FP) could maybe be a sort of "feature", with interesting, open, spindle/railings all the way around instead of it taking up space on the wing sides. Kind of "embrace" it! STAIRCASE ISSUES: Problems we hope to address with the stairway is to make them wider (currently 36") and, we want a landing instead of winder style treads so that the stone work from the FP can end at that landing. That means we also have to push the FP into the great room some. Does anyone think the great room space will be too much infringed upon? CLEAR VIEW: One idea was to build a FP with a sort of "column" look on each side (where a chimney would go up one of the sides), essentially creating a "U" shape where one could see straight through from the front door to the great room window wall. That was using a gas FP. Since then we're leaning towards an energy efficient wood burning FP where we're pretty sure the chimney would have to be straight up (vs. offset). Because of this we're imagining rocking all around the FP, all the way down to the staircase landing, and then putting some sort of neat artwork or waterfall or ? on the rock wall facing the front door. (NOTE: there's only LP or electric available on this particular bluff) FIREPLACE PLACEMENT: We're in Wisconsin and the winter's can be super, duper cold, so the 2-sided FP idea is really cool sounding, but, unfortunately, probably not a possibility in this case (Also, no way can we deepen the deck or we'd go over a 600' cliff! haha). I also don't want to really block the view at all (from our living space that is ~ obviously we ARE blocking the view from the entrance). We have considered putting the FP on the far right corner in the Great Room (GR) but that's where we think the TV should go. As much as I like the idea of putting a TV above a FP, in this case I don't think we have the space to do that and sit far enough away so not wrenching our necks to look UP at a TV (+ the heat problem). That wall of windows in the GR is also facing NorthWest so #1: we're trying to avoid sunset glare on the TV and #2 we want seating to face the river. FP will be for warmth (and viewed w/swivel chairs). Ultimately, we went back to the FP centered in the house, as shown. (Also trying to honor the Frank Lloyd Wright trademark with a wide, stone chimney in the middle of a house). Any thoughts or ideas with these things in mind? DOWNSTAIRS: Is going to be pretty open and used as a rec room (nice pool table, foose, game table, etc) and some additional sleeping space. (We originally were only going to have one BR upstairs and a carport where the 2nd BR is now. All the other sleeping was going to be downstairs!) We decided though, if WE'RE old, then our friends would probably be OLD too and would need to stay on the main floor maybe too! haha) Here's the current Basement Plan: KITCHEN: We aren't going to keep that U-shaped kitchen as shown. We'd much prefer eliminating that breakfast bar section and instead having an island. As you can probably see, that right, master wing side, with needing the wider staircase & bumping out the MBR end wall,is what's causing us the most difficulty rearranging to make the best use of space. We'd still like to keep a foyer coat closet & a desk area. Also trying to figure a better designed master bath w/a longer shower w/seat and better linen closet design. Could have a pocket door vs. swinging. (Would like opinions on pocket doors!) Lastly, the master closet is dumb and of course should have either bi-fold doors or? Any and all ideas are very welcome. PS: Here's a home in Madison, Wisconsin that is one of my "Inspiration" pictures! Love the wide horizontal, dark brown siding and typical (for FLW and WI) stone! (also, notice the typical FLW centered chimney!) mmmmmm : ) (SMILE)

I use photoshop. I don't know if photoshop elements has this option. I recommend making a copy of your file, then working off the copy. First, convert the copy of your photo to grayscale: Open the copy of the image, then select IMAGE, then MODE, then GRAYSCALE Doing that will then activate the DUOTONE option. Re-select IMAGE, then MODE again, but this time choose DUOTONE. When the window opens up, it'll have two basic selections: PRESET which will have "Custom" in the window, and TYPE which will have "monotone" in the window. You can select "Monotone", "Duotone", "Tritone", or "Quadtone" as your type. That controls how many levels of additional color (1, 2, 3, or 4) you want to add to your grayscale photo. Under "preset" you can select from numerous types of preloaded toning combinations. The name implies the type of tone it will impart to your grayscale photo. For a "chocolate" look, you might want to take a look at "brown 464 bl 1" or something in that group. You can also tweak the tones to your liking. Best, Mongo

Hello, Mrs.EmmaPeel. A lot of people use the kitchen design program on the Ikea site to start. It's pretty basic and limited to their cabinet sizes, of course, but is very useful and has a 3D view that's fun to "walk" around in. People on the Ikeafans website would be happy to answer questions if you had any issues with it. Here is a link that might be useful: Ikea

Chief Architect makes a free program for the iPhone and iPad called RoomPlanner - lets you do 2 and 3D drawings and customize dimensions. Sadly this program does not come on PC as far as i checked. You can of course buy their software for the PC ($80 for the cheapest I think)