What is your current aisle width to the island? This is important. If you are comfortable reducing that width everything else is doable. We have a full depth Samsung french door that is in a run of base and wall cabinets that are pulled forward to match the depth of the refrigerator. The added bonus for us is that while the cabinets are pulled forward the counter depth is an extra 6" deep along this run so we added appliance garages along the whole length under the upper cabinets. The stand mixer, the toaster, the food processor, the bread machine, etc. are all housed in there but we still have enough functional room in front of the appliance garages---about 18"---to use for a sandwich and breakfast making area. So much depends on your actual measurements and how you intend to use the space. Good luck.

Here's a couple options. Pull the drywall put 1/2" ply to line the opening and it's now 28 1/2". Pull the cabs 4" forward with very usefull added counter space. Do the same recess and add a 2x4 and 1/2" drywall run the length of the wall to the left as needed to bring that section forward. Build the end panel you have to the right of the frig into an 8" end wall. Rotate the frig on an angle so the left side meets the counter depth pulled out to 26" and the rear right corner is recessed in the new wall. The left side trim panel can run straight back on that side. Add up the costs and see how it compares with this $5700 Liebherr FD. Here is a link that might be useful: Liebherr 36

didn't order or authorize to charge a card that don't have my name on it

You can't do it from here :-) This is a discussion forum. You need to contact Houzz customer service. And there is a 'My Orders' feature under your member profile that could be helpful (don't know for sure as I have never ordered anything). But commenting/complaining in a discussion forum is not going to provide any resolution.