New build window help also needed…
Claudette Pilger, Psy.D., Inc.
last year
Featured Answer
Sort by:Oldest
Comments (11)
millworkman
last yearRelated Discussions
Building New Home--Need Window Advice?
Comments (14)Hi Central 79, Glad to hear you are narrowing down your window options -- it will be good for you to get the decision made so you can move on to the next big decision. I don't know anything about either the Windsor or Plygem windows, but hopefully you will get feedback from the window experts on this forum about these two brands. I know Integrity is a popular choice on this board. As per mixing different window materials, I think that would not be a problem with the attic windows, or any basement windows. We have vinyl in our basement, and on the north front face of our home. Before starting our addition we had recently replaced all the north facing windows with a high quality vinyl windows. When we chose to go with fiberglass for the addition, I was worried they would not go. However, this has not proven to be a problem given all the windows on one side of the house are the same. All of our windows are white like you are suggesting. For sure the vinyl windows we have have thicker mullions than the fiberglass, but they don't look that different. Now we don't have wood on the interior as you are considering as our fiberglass windows are fiberglass on the inside and outside -- not sure if that makes a big difference. I was unclear from your post where you were planning to mix the windows. Will different windows be in the same room? Will different windows be on the same side of the house viewed from the exterior? I do think the attic fixed ovals will not look out of place with your main floor fiberglass windows. Are you planning to mix two or three different kinds of windows? What do others think about mixing different windows? Carol...See MoreHelp choosing window materials & brand for new NW contemp. build
Comments (10)As I mentioned on the other thread, we looked at thermally broken aluminum but ended up with Milgard fiberglass because we could get black inside and out. Also wanted to note that you don't have to have the same coating on every window to meet the codes (although you wouldn' want to change on the same wall.) We had a spreadsheet with the square footage of each window and the performance of each coating and tweaked it considerably to get the average to meet the code, which is what is required. It's a little odd because the code seems to assume we are in an air-conditioning climate, so solar gain is considered a bad thing, whereas we were trying to get some solar gain on our south side. (think we ended up with 3 different coatings on different window orientations.) Good luck! (There were some additional specs with the Milgards that you'd want to take into account if you go in that direction. I'd have to look them up.)...See MoreNew pool build Buffalo NY. Need help and advice on build and design!!
Comments (2)This door will be removed. BBQ area will be under here. Not sure if you can tell from the pictures but the concrete is pretty rough. Our PB suggested poring new concrete to bring it to the new level of the door and with the pool and stamping it all to look cohesive. Problem with that is it costs 14k and we would like to put that money into other things.Anyone have any suggestions as to how we can make it blend in and look nice with the new stamped concrete?...See Morewindow decision needed--new build Andersen vs. Marvin
Comments (56)Perhaps not, but as we know we can use the best material in the world and if not engineered properly or quality control standards adhered to you can a product that is subpar in performance. Have you had any experience with the higher quality vinyl windows, ones that have higher PG ratings, better air infiltration ratings better U-Value ratings? All these would have far better numbers than the Marvin unless you want to use there numbers that are using tests that are irrelevant ....See MoreMark Bischak, Architect
last yearClaudette Pilger, Psy.D., Inc.
last yearClaudette Pilger, Psy.D., Inc.
last yearPatricia Colwell Consulting
last yearWestCoast Hopeful
last yearMark Bischak, Architect
last yearMark Bischak, Architect
last year
Related Stories
GARDENING GUIDESBuild a Modern Window Planter Box
This simply designed, easy-to-construct and inexpensive DIY window box can give your home or shed just the right touch of color
Full StoryHOUSEKEEPINGWhen You Need Real Housekeeping Help
Which is scarier, Lifetime's 'Devious Maids' show or that area behind the toilet? If the toilet wins, you'll need these tips
Full StoryREMODELING GUIDESHow Small Windows Help Modern Homes Stand Out
Amid expansive panes of glass and unbroken light, smaller windows can provide relief and focus for modern homes inside and out
Full StoryWINDOWSDiamond Muntins Help Windows Look Sharp
As the real deal or a decorative grille, diamond window muntins show attention to detail and add traditional flair
Full StoryORGANIZINGGet the Organizing Help You Need (Finally!)
Imagine having your closet whipped into shape by someone else. That’s the power of working with a pro
Full StoryLIFEDecluttering — How to Get the Help You Need
Don't worry if you can't shed stuff and organize alone; help is at your disposal
Full StoryKITCHEN DESIGNDesign Dilemma: My Kitchen Needs Help!
See how you can update a kitchen with new countertops, light fixtures, paint and hardware
Full StoryCONTRACTOR TIPSBuilding Permits: What to Know About Green Building and Energy Codes
In Part 4 of our series examining the residential permit process, we review typical green building and energy code requirements
Full Story
PPF.