Why pay for sheet metal and cheap burners when you can learn, compare, and get a quality grill in the same price range? For Gas Grills 101 check out "How to Choose", "Major Differences", and "What to Look for" at www.picksinc.com/GasGrills/home.htm For Gas Grills 201 check out the "GrillTalk Message Board" at www.picksinc.com/Grilltalk.htm Don't spend $500 or $1000 for a grill that is poorly constructed, made of sheet metal, and has cheap burners!

athensmom - I agree that the Emtek sandcast bronze is too rustic for your house (or mine). Look at Emtek lost wax cast bronze. That is what we are going to use for the front door and, probably, the French doors. It has a much more refined look and the Medium Bronze doesn't have the purplish cast of the Burgundy. They have knobs as well as levers. I thought we were going to use the Emtek French Antique brass for our interior knobs until I actually got to see it. It looks very "artificial" and not at all what we want. I would love to have unlacquered brass and let it age naturally (or will a little chemical help) just like the pulls on my antique bedroom suite. Even though I swore no ORB, we will probably go with Emtek ORB for many knobs since they have the copper underlayment that does look nice IRL. Unfortunately, it looks like all of the Emtek brass knobs/levers are lacquered. So, to get antiqued brass we would have to remove the lacquer. Its sounds like it is hard to do, but, if I want to be so masochistic, how would I do it? Also, we want to have about 4 sets of glass knobs. Would the chemicals used to strip the lacquer from the brass mess up the backing on the glass knob? House of Antique Hardware has unlacquered brass, but the glass knobs are only 12% lead crystal rather than 24% for other brands. I'm just not sure those would look as good. Does anyone have another source for unlacquered glass knobs? Thanks - Jo Ann

Hold on RAVI! I am not sure if I understand it correctly. I posted what I THINK is how it works, but the guys on here may tell you I am wrong. I posted to see if I understood it correctly or not, but got what I think was a veiled insult from saltidawg, not sure if he intended that or not.... I ended up with the 2 stage, but I think it was knee jerk reaction to a price reduction my contractor offered me that made it seem like a good idea. I so excited that I got him to lower his price that I forgot the big picture and didn't ask him if he could also give me a better price on a one-stage (the 1-stage he had offered was a lower end, so I would have had to negotiate a better 1-stage). Therefore, I think I may be spending more than I need to and am HOPING the 2-stage was a wise idea. If price is the issue, get the 1-stage. Are you the guy where it was $1300 more? My quote from a large company here, was $1300 more for the 2-stage than the 1-stage. It ended up as a decent price for a package of work I was having done so I went with it. If I were just doing the hvac, I would not pay $1300 more for the 2-stage, with everything else the same. I think mike_home has some very good posts explaining everything. If you can afford it I think the 2-stage is nice to have, but not necessary. I have also read and been told that the 2-stage will help with the uneven cooling because it blows lower but longer. You might see if anyone responds to that claim, though I see you say they are larger rooms...can they add vents? Also, this may not be true, but my the salesman (claims he was a mechanic/installer) said that my furnace needs are between 80 and 100k so he is giving me the 100k because the blower will be stronger (they will and that should help with the cooling upstairs. I have 2 rooms that are usually warmer, they get the south sun that doesn't help either.That is sort of what you are saying with the cooling and the fan. Why does the 3.5 not get the rebate?

KK- The drawers are 42 inches wide - and I do love the big drawers but had a weight problem and still working out the issues... The glides will work with one or two hands (or one finger if needed) - I just try to make sure I pull out evenly and adjust for one hand. I used one pull for everything under 30 and two for larger than 30. Also- take a look at Badgergal's pulls - I almost switched but she knocked some sense into me... Hickory Hardware. Badger, Breezy and a few others - used various size pulls but with my cabs all different sizes, I felt this added symmetry back to my kitchen I did use longer ones on my giant pantry and our "caves" cty - I did get some samples of Rocky Mountain - and the distribution point is just down the road - I still had to order them, pay for shipping, and when I returned them, they had a steep restocking fee - I gave them a piece of my mind and hopefully they changed their policies. Holly - Thanks! Your kitchen will be awesome when you get the bugs worked out...(Granite, etc) Hang in there.