We had Johnson Hardwood"s Luxury Plank Vinyl flooring, Public House- whiskey sour installed by the builder after we looked at the product at a flooring center recommended by Johnson. We have lived in the house for exactly 2 years, and for the first year the flooring cleaned up nicely. In the beginning, I had contacted the "technical rep" for Johnson, and he recommended Rejuvenate LVF cleaner as it is low Ph. That is the only product I have used on the floor since we moved in. We loved the floor so much that we paid $7000 to have it installed in our lanai last year. In the past several months, the floor in the main house is blotchy or spotty throughout, and it looks like certain areas have a film. We clean up water and spots immediately, but the spots continue to show when the floor is wet or dry. So far the lanai doesn't have the same problem, but it's only a year old now. I did report these issues to the technical rep at Johnson, and he wants we to contact the maker of Rejuvenate as that product is likely the cause of the spotting all over the floor. He also wants me to find out who the contractor bought the flooring from when the house was built, and I am to provide the name and contact info for the flooring contractor who installed the floor in the lanai last year. I have tried to take photos with my iphone, but only a few of the spots will show up. I clean this floor at least twice weekly with the Rejuvenate and I vacuum it daily as everything shows up on the dark floor. I know I am going to get the run around from the Johnson rep. I am so upset that we paid top dollar for what we thought was a quality flooring only to have it look like cheap vinyl flooring. I wish we had never heard of Luxury Vinyl Plank flooring.

I vote for floating, click, wood look, luxury vinyl plank. I especially like the style with knots and chatter marks. Lay it throughout the whole house, on the diagonal, with no thresh holds. That's what I did. I can clean the entire house in approximately five minutes with an electric leaf blower. Porcelain tile is more durable however it is more expensive to buy, more expensive to install, and more expensive to uninstall. Also, some tile is extremely slippery when wet whereas wood grain LVP is not slippery at all. Five years later I am happier than ever I chose grey driftwood luxury vinyl plank for a house with dogs, kids, beach sand, and lots of wet feet. If the house gets inundated from storm surge and ocean water gets inside, I can unclick the LVP, clean and dry the subfloor, and then reinstall the same LVP and it will look as good as new.

The floor likely has a 'wear layer' of UV cured very hard aluminum oxide clear from 12 to 20+mil thick. You will need to sand the finish to get the next coat to adhere. That coat(s) would be a primer. And then multiple coats of a topcoat. I'd guess at a roller applied boat paint. It's meant for this type of application. Kinda self-leveling. You must use products by the same manufacturer. And follow the recommended procedures. Perfection Pro topside paint by Interlux. A lot of work and the products are expensive. . . .It will not be as durable as the original finish because it will not be as thick. . . .So you may want to pull up the flooring and replace it with a rigid vinyl plank that you like the look of.

The picture you posted is a good floor. It’s rugged, waterproof and has a flat finish that shouldn’t show scratches. I used it in my home and love it.