Check all the pieces from Coretec before installation! We had a Palo Alto Walnut Coretec floor installed in August. As they were getting ready to install the T-moulding I realized the color was off. Also it was supposed to be skimmed in the same pattern as the planking but wasn't. They didn't install it. The quarter round was also off but similar enough in color that we agreed to keep it. FIVE MONTHS later Coretec informed the installer that Palo Alto Walnut is discontinued and we won't be getting the T-moulding. Back to square one. I am so frustrated. My guess is that they are outsourcing the trim pieces without telling anyone. Someone mentioned that Shaw bought Coretec.

Hey @Donna Clark, were you able to get any photos? or did you end up installing this particular floor? we are thinking of this as one of the choice and photos would go long way to help us decide if you can share some details. Thanks!

I would appreciate anyone's comments on this manufacturer or the color. It appears to be made in China. Is that the general industry of LVT?

You want to avoid applying a second coat of stain. It will cause adhesion issues. What you can do is add some of the stain to a oil base poly, then apply it. Another option is to use poly shade in a similar color. You can apply 2-3 coats of the poly shade to achieve your desired color. Poly shade is oil base. Contractor should have water popped the floor prior to applying the stain. The color would come out darker.