As an update, I should note that my original ca. 2010 Sharp 1214 OTC developed an issue this past Spring with a stuck microswitch among the three that are actuated by the door closing. The symptom was apparent failure to stop when the door was opened. This would, of course, be a problem with a microwave source, but in actuality, only the lamp and fan kept running. The MW source (magnetron) has more redundant safeguards. While waiting for parts I obtained a new model of the same unit and installed it. I have repaired the old unit and kept it for a spare. As it turned out, the microswitch was only a tad gummy, and once freed worked normally. I replaced it anyway, and cleaned the interior spaces (lightly greasy) and venting paths. I think the new model has a brighter display, so the old model's display may have faded some (lost contrast). I don't think the display would be cost-effective to replace due to being buried in the door. Although I tore the unit apart to get to everything (other than the door interior), the microswitches are fairly accessible with just the cover removed. Dissassembly manuals are available on the Internet, and parts still available from Sharp's designated distributor. I also obtained an example of the recommended microwave leakage test meter, and checked out the old MW. No measurable leakage relative to Sharp's standard of 1 mW/cm2, much less the US Government's limit of 5 mW/cm2. I could only get a reading inside the MW's shell next to the magnetron output, so I think the design maintains a safe environment even after significant age.

My friend installed her 36" Wolf AG range and a marble subway tile backsplash less than a year ago. She is an avid cook who uses the oven and burners every day. The marble tiles are now discolored; I don't know if the heat, food splashing, or some combination of the two is the cause. But I suspect the discoloration is caused by the heat coming from the oven vent riser on the back of the stove. There is no sign of the marble cracking or crazing.

Your kitchen% sounds exciting. I am not a fan of 4inch b-splashes, but have seen some pretty ones. I say find a tile to match the color you love or get a clear glass type tile that can show the wall colo.r you love peeking through. That way you can have the BS go all the way up. There are even stainless steel tiles mini ones you could mix with the glass that would look nice with the SS backsplash for your range. Your wrote..... contemporary, sleek, semi-commercial java lower cabs and frosted glass/aluminum uppers walls are painted a light grey that tends toward blue Jerusalem Stone Blue I love love love Reflecting poool by SW. Is this it? Here goes... FineLineBlog Bardon Cabinets This is from an IKEA DIY website A google image that said Ikea Cbs with A Soft gray blue paint. Your Granite/stone would look awesome here Joyce Kitchen Design This BS is tiny blk glass tiles. Zamora Blog called Donefinding Maybe find tiles that match your favorite paint color No BS and it looks lovely. Phelans Blue Tile 4 inch BS and other tiles. Vetro Misson Stone and Tile Mason BS The Kitchen Designer Dish rack image but neat tiles to think about Hope these helped. If there are some you like more. I can keep searching for you. ~boxer

Cabinets are Thomasville brand, color is Dover Countertops are Ultra Compact. There is graphite crown molding going above the trim to the ceiling.