We can't really tell because each person's monitor reads color differently. As Lisa G noted, on her monitor the Bella looks pink. It looks pink on my monitor too and looks like it clashes with the indoor flooring. However, on your house in your light, it may look fine. That is the ONLY way to determine which colors work together. By bringing a large enough sample and laying it down onto the ground. Then look at it at different times of day, in all different light.

Consider that before paver companies got so creative, it began with a simple brick shape and only a couple of colors. The colors are usually not pure, but mottled as part of the manufacturing process. (Cannot tell from the mfg. literature if this is the case here.) There are innumerable attractive, time-tested patterns that can be constructed with the standard brick shape: basketweave, herringbone, running bond, modified basketweave, stacked bond & probably more. I doubt that anyone who installed paving from these simple options was unhappy with the result. Personally, I prefer these 'old school' options. They always looks nice and stand the test of time, while many of the new color ranges and patterns that have been developed since, look unpleasant from the day they are installed! The one's with sharply contrasting colors in the mix look blotchy and garish to me. The one's with high texture can be difficult to walk on, if ever someone would show up in heels for the patio party. Barefooters might not care for them either. The 'Miami' model, with its uniformly wavy edge and perfectly rounded corners, looks like a fakey facsimile to me. I don't care much for the one they call 'Cobblestone.' 'Old Canada' seems OK in the picture, if the color is not too wild. But you cannot go wrong with the 4" x 8" brick. Another one I've found to look very good is the 4" x 4" square in running bond configuration. An important fact to keep in mind with paving is that light colors reflect the sun and can be absolutely blinding. It's almost always the case that darker is better. I would stick with grey, charcoal or red. I would also forget about white cement. It's for those who love a purer color, but generally, this is not an improvement outdoors. Usually, white cement costs more, too. Whatever you do, you can only get so far in narrowing choices via online or print materials. When you get it honed down to two or three possibilities, you must go to the paver yard and get samples. It is the only way to know if you're going to be satisfied with the end result. Get a half dozen of each sample so that you can mock up enough to give an idea of the result. Look at it on site from a distance in order to get the best feel for how it will look with its surroundings.

Ok , so I was told by my guy to go to a local stone placenta. They told me sierra isn't available around here in that particular brick shape (important because it's a well-priced option and we are already spending a ton of money between the porch steps, front walkway and huge back patio area). so I got some other options, shown here against our charcoal painted porch and BM revere pewter painted brick: The top two are by another manufacturer. And I was told by the salesperson that the second one is the most popular of that brand but I'm not sure how I feel about it with my paint colors. Thoughts? As always, you guys have been so helpful.

It's not the kind of porch that is conducive to having a lot of planting in front of it. It needs a broad landing itself and a nice wide walk to it. The walk should stay at least 6' away, min,, from the house in order to leave sufficient room for foundation plantings. "Dark grey with white trim" sounds harsh to me.I like house colors in the medium grey/taupe range with white trim. They can have a tint of color so long as it is not too powerful. The fourth example down is nearly a reversal with the body being the light color and the trim darker, but I think it works well, the house being light grey, not white. Explore Google Images as there are all sorts of house paint combinations.