skip to main content

Appliances Design Dilemma Kitchens

Kitchenaid induction cooktop - 3/16" vent between counter top cabinet?

5 years ago

Has anyone installed a 36" Kitchen induction cookop( KICU569XSS)?

It says I need to have 3/16" vent(like a slot) between counter top and cabinet.

My contractor says he will need to either shave the cabinet or shim the counter top.

My KD said it might be difficult to have the cabinet because I am getting frameless cabinets.

I am getting anxious. Does anyone have this cooktop in the kitchen? How did you solve this problem?

Featured Answer

PRO

Joseph Corlett, LLC

5 years ago

""IMPORTANT: For proper ventilation, provide a vent of 3/16” (5mm) under the countertop, in the front of the cabinet. The ventilation opening is to extend the full length of the cooktop cutout.” I would be interested in knowing of any other novel approaches to meeting the requirement. I also plan to contact Kitchenaid for their input."

They've just specified a violation of the Natural Stone Institute's Residential Design Standards. You can't span 36" without support, especially on a skinny front cooktop rail.

The air-conditioned nerds writing this crap never use context. They just want what they want to CYA, never thinking of how their product coordinates with others.

I'd clamp a fence to the cabinet and router the 3/16", then mount (3) evenly spaced stainless steel flathead screws into the top of the rail flush with the uncut ends. There's your vent and everyone's specs met.

Sort by:Oldest

Comments (6)

PRO
Sativa McGee Designs
5 years ago
It is suggested that you have that vent space, not a requirement. Having air flow allows for a longer lifespan of the appliance. It is just wanting to get airflow into the base, I would opt for putting a vent in the base of the cabinet above the toe kick.
HU-982010768
5 years ago
I am in the process of making an induction cooktop purchase decision, and was surprised to note the venting requirement when I reviewed the on-line installation manual. I found this posting as part of trying to make sense of the requirement. I like the creative idea from Sativa McGee Designs. However, unlike Sativa McGee Designs, my reading of the installation manual is not that having the vent space is a mere "suggestion." Rather, the directive is proceeded by a capitalized and bolded "IMPORTANT" and is grammatically written in the imperative as follows:

"IMPORTANT: For proper ventilation, provide a vent of 3/16” (5mm) under the countertop, in the front of the cabinet. The ventilation opening is to extend the full length of the cooktop cutout.” I would be interested in knowing of any other novel approaches to meeting the requirement. I also plan to contact Kitchenaid for their input.
Related Discussions
Is it safe to install induction cooktop in wood/formica counter?
Q
Comments (5)
The flash and char points of wood are well above 200F. Wood might discolor some after long term exposure at that temperature. Strength of the wood may drop some, but a normal counter will be far stronger than the minimum needed to support the cooktop. Looking at how my Kenmore (Electrolux) induction cooktop is supported and ventilated, I'm not sure even steady state cooking could get the support edges to 200F. My cooktop's directions do require a minimum space (set by plastic spacers) between the cooktop and the cutout edges to meet safety codes. Due to the edge ventilation scheme used, the installation instructions do not set a minimum dimension below the cooktop chassis that must be met. The manual advises against using a drawer because access underneath is required for installation and maintenance. kas
...See More
Counter depth needed for a Bosch Induction cooktop
Q
Comments (7)
We have a Thermador induction cooktop and downdraft (Bosch twin, Bosch made) in our kitchen island. Just now measured countertop and it is 33 1/8" deep, on a base cabinet that is 30 1/2" deep (this does not include doors, just the cabinet itself.) Island had to be that deep to handle specs of cooktop & downdraft. I hope this helps. If there is any way you can configure an overhead exhaust, do it. The downdraft unit is very inefficient (rather lame, really), but better than nothing. We had no other option. Editing this post because it occurred to me that our actual cabinet/island depth might be deeper than necessary because we did a full kitchen remodel last year and we had the cabinets use the same footprint. So ... you probably do not need 30 1/2" depth. Just wanted to correct myself.... This post was edited by Cavimum on Mon, Jan 6, 14 at 18:02
...See More
install induction cooktop and wall oven BETWEEN cabinets?
Q
Comments (7)
Basically, what it is telling you is that you can build a platform the same dimensions as the bottom of the cabinet (toe kick) and set the oven on it. Then you MAY have to use fillers on both sides depending on how far apart the other cabinets are. BTW: that's 30" wide, not tall. The cabinet might be 35" tall. Remember that the countertop depth is subtracted from the cooktop depth. So if the countertop is 1.25" (does this include anything on top of the cabinet?), the depth of the cooktop is only 3.375" from the top of the cabinet. If you run out of room, you could either raise the countertop and/or lower the toe kick. YOu can also ask your cabinet maker to put that base panel inside base instead of on top.
...See More
16" space between counter and upper cabs too short?
Q
Comments (25)
We had 15" in our old kitchen and I hated it, but it really depends on how you're using the space. In our kitchen, it was the primary work space so I was always hitting the cabinets, and the stand mixer kept gouging the underside of the cabinet when I'd forget to pull it out all the way before flipping it back. But if, in contrast, you're using the space to house a microwave or toaster oven or what-have-you--16" will be fine (and better to have the storage space there). Don't forget that you can put three shelves in a 34" cabinet, too, though. We have three in a 32" cabinet and love it--every shelf doesn't need to have a full 12" of clearance. I can reach all of our shelves (intentionally designed that way) and we keep cans/jars on the lowest shelf since they don't need height. How tall are your ceilings? If you post that with a floor plan, I'm sure you will get lots of feedback and ideas on how to plan the cabinetry! If you're doing custom cabinetry, I wouldn't feel hemmed in by standards sizes and distances--one of the benefits is that you can mix it up and do what works best for your space.
...See More
M
5 years ago
What kind of countertop do you have. Many countertop choices have a mitered edge that you should be able to shave down. That might cause issues with stability though, as the countertop still needs to rest on something. I'd suggest talking to the fabricator and asking them if they can think of some other type of support.
dan1888
5 years ago
last modified: 5 years ago
Look for a different brand cooktop. Bosch, Miele or Frigidaire. 17 power levels instead of 12 for KA. The installation instructions for a 36" Bosch Benchmark do not require or suggest an opening of any kind at the front. Ventilation space is required at the rear with a rear cutout to the cabinet back if a minimum space isn't designed in. See the installation instructions on page 6.
newproject858
Original Author
5 years ago
@HU, I contacted Kitchenaid to ask how important it is to have that venting, and the rep said it is a requirement.

Related Stories

WHITE KITCHENS White Cabinets Remain at the Top of Kitchen Wish Lists

By Erin Carlyle

Find out the most popular countertop, flooring, cabinet, backsplash and paint picks among homeowners who are renovating

KITCHEN CABINETS New This Week: 3 Modern Kitchens That Rock Warm Wood Cabinets

By Mitchell Parker

Looking for an alternative to bright white? Walnut cabinetry offers the perfect tone to warm things up

KITCHEN CABINETS Get More Kitchen Storage With Counter-Depth Upper Cabinets

By Toronto Interior Design Group

We give you the lowdown on expanding your upper-storage capacity

INSIDE HOUZZ Top Kitchen and Cabinet Styles in Kitchen Remodels

By Erin Carlyle

Transitional is the No. 1 kitchen style and Shaker leads for cabinets, the 2019 U.S. Houzz Kitchen Trends Study finds

KITCHEN DESIGN New This Week: 3 Welcoming White-Cabinet Kitchens

By Mitchell Parker

See how the most popular kitchen cabinet color effortlessly supports a variety of inviting design features

KITCHEN CABINETS New This Week: 3 Cheery Kitchens That Rock Wood Cabinets

By Mitchell Parker

Yes, you can get a bright and open kitchen without white cabinetry

KITCHEN DESIGN Kitchen Remodel Costs: 3 Budgets, 3 Kitchens

By Bud Dietrich, AIA

What you can expect from a kitchen remodel with a budget from $20,000 to $100,000

KITCHEN DESIGN New This Week: 3 Kitchens That Stylishly Mix Dark and Light

By Mitchell Parker

Combining dark painted cabinets with wood cabinets and other warm tones creates a sophisticated kitchen color palette

BEFORE AND AFTERS Gray Cabinets Update a Texas Kitchen

By Mitchell Parker

Julie Shannon spent 3 years planning her kitchen update, choosing a gray palette and finding the materials for a transitional style

INSIDE HOUZZ Data Watch: Top Layouts and Styles in Kitchen Renovations

By Erin Carlyle

Find out which kitchen style bumped traditional out of the top 3, with new data from Houzz

Sponsored

RTS Home Solutions

3 Reviews

BIA of Central Ohio Award Winning Contractor

More Discussions

Combi Steam Oven usable dimensions - Thermador, Wolf, Miele

3

Stove exhaust vent moving and closing an old one

15

Good quality countertop microwave ovens?

8

Any advice on a vent liner?

4

New 36" Gas range. Took a chance and love it

4