Funny that you guys started to discuss this just when I am about to start this same project myself. Here are my findings. First off, if you plan of putting a counter on top of the new 3.8 cu ft FL, good luck, and have your pocket book ready. You see, the deepest "standard" counters are those for kitchens, at 25 1/8". Assuming that one leaves around 5" of clearance behind those newer FL machines for vents, air circulation, heat, etc, then you are looking at about 30"-35" of depth, depending on how flush you want the counter to come to the front of the machine. Having said that, there are 3 prices for laminate counters in the stores (like Home Depot). The counters you see in the store in stock are the cheapest, and will cost around $10 li ft. If you need to pick a finish that matches say the sink counter top in your bathroom where the machines are also located, then that is considered a custom order, even if it is a standard depth. This will easily double the price to $20 li ft. Now if you want to order a non-standard depth so that it goes from the back of the wall to the front of your new FL, then you are looking at $35-$50 li ft, depending on type of finish like rounded vs sqaure front edge, back ledge or no ledge, etc... Keep this in mind when shopping for a counter top. I would like my counter to cover the machines completely, so I might have to bite the bullet and order the more expensive counter top.... Again, I am talking about a laminate counter top, no fancy materials here.... I am from Canada, and here is what the local Home Depot quoted me in Canadian dollars for the 3 options.. 1) In-Store counter (limited finishes) 25 1/8" (standard depth) X 6 feet = $68 CAD Custom order counter (you choose the finish) 25 1/8" (standard depth) X 6 feet = $132 - $150 CAD 30 Csutom order counter (you choose the finish) 30-35" (non standard depth) X 6 feet = $222 CAD I believe the last option of non-standard depth only allows for a square front edge finish. If you want a rounder edge in front, like that found on your kitchen counter, the price jumps to $500 CAD, since the guy said that they have to charge for a full 4X8 sheet, and then cut the custom size from there, in order to get the rounded front edge... One other option you can do, which my brother did very nicely is lay down 2 sheets of plywood (for extra thickness), and tile the top and sides, looks really nice, but is a lot more work...

A good friend of ours has done many concrete countertops and they look amazing. We seriously considered it for our remodel. The staining/etching is what turned us off. To be perfectly frank I'm a slob in the kitchen. A countertop that would be damaged by red wine or lemon left on it overnight is just not feasible. Instead we went with soapstone. If it can hold up to legions of teenage chemistry students I feel it can hold up to me. :D If you do decide to go with concrete have you seen the books by Fu-Tung Cheng? They're excellent. Soapstone can be a lot more affordable as a DIY project. The quarry we bought from has DIY kits for about $25/sq ft or you could make it even cheaper by using tiles. Soapstone seams incredibly well.

Pllog, Well, we are in both in CA, as some would say! ;) I do agree with your comment about granite being the standard because of its perception as being a luxury item. FrmrsDghtr, WOW!!! Love what you were able to do!!! RosySunnyGal, Our counters are Floating Blue which is a mostly turquoise in white cement matrix color. We were able to pick our slabs at the factory when it was still here in the Bay Area years ago. We have several KDs in our area that had samples of Vetrazzo, Icestone and Fuez to look over. IF you are looking for the wow factor, these will do it. With that in mind, I do recommend that you really like your countertop color because it is a very prominent part of your kitchen. They also aren't cheap and I highly recommend that your installer be someone who knows how to work with this material. Our installation fabricators claimed they did and we had multiple problems with them that we finally had to hire a second company to fix. We looked at all of the green countertop materials, and this was the one that my DH and I were able to agree on despite the price. BTW, I don't include quartz or C-stone in this category. I do recommend that you do an online search for recycled glass companies because there are several others besides the three I mention above. The ones that I have ran across are: Gilasi in the Chicago area, Urbanslabs in SoCal, Vetrazzo is now in the Atlanta area, and more that I have seen around the US. I do recommend if you can using one that is near you because of the weight and shipping cost of the slabs. If you are interested in knowing more or seeing some pictures of my counters, please, PM me.

Flwrs, Sorry, I almost missed your reply. I have two AEG Ovens. A half and a full. These are two separate ovens, not a combo. AEG is the european... friend? of electrolux. I am located in Oregon and had them shipped in from overseas via a company in Canada. I can give you references to that if you wanted to go to those lengths but I have to say, as much as I love my 1.5 I don't know if I would push the expense and stress of doing it that way onto somone else. Steam ovens ARE pricier. Just flat out. No holds barred. Lol. But they are the only ovens where people seeming to be aiming for smaller in size rather than larger. If you think you might be interested you should put in a new post asking about steam ovens in the name. You'll get a ton of responses. And, for that matter, tons of cool pictures!