With all due respect to LL, I disagree that just because an island is movable, you don't need to worry about its dimensions. If it's over-sized for the space - in other words, doesn't allow comfortable aisles - you'll need to move it so often that it will be a PITA. It's not going to be a light little thing that is easy to shift, it's going to have some weight to it, especially if it has a stone top and has additional weight from the items you store on it. I would find an island that fits the size so that you only need to move it on rare occasions, not on a frequent basis. I drew up 2 variations of the U lay-out with an island and banquette seating. This allows you a 27" x 44" island, which I think is large enough to be useful. The aisle measurements are fridge (handles included, est 35" deep) to island counter, island counter to sink run counter, range run counter to island counter, peninsula counter to exterior wall, peninsula counter to table and table to wall. Oops, I forgot to adjust the above plan to show two 24" cabs to the left of the range. I do show that on Plan A-2. The plus with the banquette in this plan is that those seated on the bench can slide in and out without asking someone to slide out first. The downside is that clearances between the table and top and bottom walls is a bit tighter than recommended (44" for walk-behind aisles). You could center the banquette and have nearly 39" at each end instead of slightly off-center as I drew it. Here's a variation of the above. This plan creates an L banquette, which allows room for wider aisles at the top and room for a 30" cabinet next to the table. You can use this as your Command Central. The downside is that the person seated in the lower right corner will need to ask someone to move in order to get in and out. Some people are okay with that, others hate it. Here's an issue with both plans. It's a heck of a long hike - more than 11' - from fridge to sink in this plan. That definitely more than is recommended by the NKBA and for good reason. I'd like to see a water source between fridge and sink. However, the island just isn't long enough for a prep sink, IMO (I agree with a wise CMKBD, whose name escapes me at present, who advises against a prep sink in an island less than 60"). One option is to switch out the 36" corner Susan and make it a 36" corner sink cab for a prep sink. But ... then what purpose will the island serve? I agree that it would be nice to have a little more counter to the right of the sink, say by making that corner a 36" Susan cab, but that reduces the aisle between peninsula and exterior wall to 39". If there wasn't an in-swing door right there, that could be doable but since there is, I think a wider aisle here would be better. Which is higher on your wish list: an island or counter seating? If the former, I think Plan C is the better option for you. It has a good flow plus it leaves sufficient room for a kitchen table; no need to resort to a banquette.

Ok. In that space, a round table is a good choice. With a leaf, you will have an oval that will probably seat 6. Is that sufficient for your needs? Round and oval tables are conducive to nice conversation and interactions. That is probably the max for that space but I can’t be sure without room measurements. You do need 3’ from edge of table for each chair to be able to be pushed back. Also, to have room for diners to leave table and get around people still seated. Give me room measurements and I can give you specific sizes of furniture that would work best. As to chairs, lower backs in smaller spaces are usually a better choice.

Don't freak out, it was a one-time exposure, not a continuous, long-term issue. Many of us got exposed to asbestos at irregular intervals. As an example: When brake materials on cars had asbestos in it, I did brake jobs on the family cars and experienced a cloud of brake dust many times. I have no lung issues and just turned 65. Regarding clothes - no issue there. You've already washed them. If you are concerned with asbestos dust in the house, I would wash the surfaces or wipe them with wet cloths, wet asbestos doesn't float in the air. If you are still freaking out, where a qualified respirator while doing it.

@Buehl, @ulisdone: thanks for the great replies. For reference, the distance from the edge of the countertop to the island in the current 1989-built kitchen is 40" by the window and 40.5" where the rangetop will go (a downdraft cooktop is angled in the corner of the L, which is a huge waste of space). The aisle measurements in the photo are a bit out-of-date -- they're from the first posting. The software I'm using really doesn't want to measure countertop-to-countertop so I figured what it does do is standard and I just mentally subtract 1" of overhang on each side, not 1.5", which seems like a lot -- is that standard for quartz countertops? The current measurement (countertop to countertop) from sink to island is 44-3/4 and rangetop wall to island is 40-1/4, about the same as we have now and 2" less than ideal. Also, the rangetop sticks out a bit further I'd love to move the island further from the rangetop (window seat to island top is about 47") and the issue is with the flooring -- Amendoim (aka Brazilian Cherry) in a size and height that's no longer available and we have exactly one 22 sq ft box left. It runs perpendicular to the rangetop, so to move the island towards the bay window, we'd have to fill in with a bunch of short pieces. Maybe our contractor has some suggestions, or maybe moving it down towards the window exactly 3.25" and filling in with a board the long way under the toe kick would be ok. We are kind of assuming they can remove the existing cabinetry without wrecking the floor, otherwise it'll be something else to deal with. And we love this floor. The seat on the window side of the island is for my wife. She would like to sit in the kitchen and be able to see the TV without straining her neck, so we asked the original designer for a solution to provide 1 or 2 seats on the window/sink side of the island. At this point, it's just the two of us (kids grown and moved out) so the design factors are both our comfort along with future-proofing or we'd only need 2 seats. We do expect to be here for at least another 10 years. We also keep going back and forth with trading the location of the refrigerator and ovens: I agree that the refrigerator is more practical on the non-window wall as far as opening and usability goes, but it makes the line of the upper cabinets look odd. This is from the original posting but I'll repeat it here: That supporting wall to the right of the fridge sticks out 2" into the room, so the refrigerator has to be moved to the left to allow for 110 degree opening. I stuck a 6" pantry pullout there but our contractor/cabinet maker will have to tell us if that's practical. or if we move the fridge to the right and leave just the 2" of clearance and expand the drawers or move the rangetop and upper cabinet down a bit. I figured considering a pullout here would be wide enough for cans and peanut butter. It's the cabinet over the fridge that just looks a bit odd. For reference, here is the other wall: This version of the island has seating for 4 which is enough,but doesn't have the big, deep 36x36 island drawers on the sink side, which are 24x34 here. Is this a better layout overall? Here is a west view. This has the island centered on the bay window, which is where the current island is as well. I moved the island to the left in this view to increase the space when the refrigerator was on the sink wall so it was no longer centered and that looked ok (the flooring strips can be inserted on that side). There will be a toe kick and paneling on this side of the island as well but I can't get the program to draw that. Regarding the appliance sizes, The difference in the appliance prices between, say a 36" and 48" rangetop or a 42" vs 48" fridge is nominal and they've been ordered (2 month lead time). I am curious about your comment about the hood -- this is what the original kitchen designer specified and we all agreed this was more elegant and spacious than the blockier commercial-looking range hood that takes up the entire space. I'm curious about what you'd recommend instead. Something with glass? Or a cabinet running across the top? We also aren't wedded to the door styles, so I'll try a rendering with slab cabinet doors. The cabinets are going to all be custom (a benefit of using a local cabinet shop), so we can do pretty much whatever works. We meet with the general contractor/cabinet maker in 10 days or so to finalize the plans and actual measurements, and I'm sure he will have some suggestions as well. Thanks for the measurements -- I've printed those and will use them to see what works.