You're not going to have enough counter depth front to back to get it behind the large bowl. It has to go behind the small bowl unless you're doing a bump out. And then, I really think it wouldn't quite look right. Change the faucet or change the sink. Personally, I'd change the sink and go with a single bowl silgranite. Everyone that has one loves it and wouldn't go back. Drink the Koolaid. You'll be glad you did.

One thing to be careful of... Ours are all on-center with each other. However, the soap dispenser, when pumped, drops the stream of soap down right along the back edge of the sink. If it were just 1/4 inch closer in to the sink, it would drop it into the sink, where it really needs to be... Lynn

Sounds great, but you know we all want pix! ;)

" Some faucet handles only go from straight up to forward, no backward. That's the one you want." My Hansgrohe Metris handle does not rotate back; I don't know if that's true for all Hansgrohe faucets, but it is a nice feature. (Hottest temperature is dialed with handle pointing up, coldest is with handle pointing forward.) All the manufacturers' sites should have drawings with clearances required......look for a link to installation drawings.