My mother painted hers years ago. Some type of faux finish. They held up pretty well for several years, but didn't age well. My cousin helped me update her home for sale (as I live out of state). They did some kind of spray on finish. I haven't seen it in person, but it looks amazing in pictures. Almost like quartz. Even turned the bright yellow sink black. It only cost $500 for her huge kitchen and can with a lifetime guarantee. Everyone who has seen the house has told me they were surprised I spent the $$ for new countertops! I will try to find out what its called.

Reading all your posts makes it sound so easy to use chalkboard paint. I've been trying since last summer to paint 24"x24" chalkboards to frame as gifts. The finish turns out terrible! I've gone through about 6 quarts of paint and numberous rollers and brushes. I start with a nice clean smooth piece of masonite. First I paint it with primer, then sand it so it is again nice and smooth. Then the trouble begins. I've used all different kinds of rollers and brushes from the most expensive I could find to the cheapest. And yes, I've tried foam rollers and sponge brushes. I've even tried different brands of paint. The problem with the rollers is they leave a very textured finish. The problem with brushes is they leave loads of lines. I finally asked my brother to paint a board and the results were the same. Everyone tells me you should have a nice finish with no texture or lines. I can't believe I am the only person who has this probem. I have spoken to people at paint stores and have even called the manufacturers of the paint. They just keep telling me it should work. Months ago I posted on another forum to ask for help, but they just said use a foam roller. Someone did suggest that I try the spray, but that is definitely out. I don't have a place or the equipment for that so, that is not an option. I am very discouraged, but I'm determined not to give up. But, trying the same thing over and over just doesn't work. I would be so thrilled if anyone has any ideas at all that may help!! Thanks for taking the time to read my post.

We were recently in Italy, and at a very small bar there, some of the walls were painted with a creamy white pearlized paint. The other walls were painted dark red, and the filmy curtains on the windows were the same red, only shiny, translucent fabric. While I am not planning to use the red, I definitely want to do the pearl in my entry which is not a huge space. I think it will brighten it up a lot. I was also thinking that it would be great on a ceiling to diffuse light too, but I wouldn't do that if I was already doing the walls in pearl.

Apologies for not posting sooner. I ran a search for both paint and dye. Both have some cautious applications. Plus I got tired of seeing Simply Spray come up 75% of the time. Could not find auto fabric spray once used. It was probably an issue like stippers are now. Too strong for the EPA to allow. And can't remember how long my project lasted from years ago. Things mentioned about all fabric sprays: Takes far more than expected as it seeps into the padding too. Very difficult to cover evenly, even with a second coat. All have a rough texture afterwards. They are primarily used for vynal and very low carpet. The type of material is a big issue. Thorough cleaning and drying prior is a definite. Stains will still be there. I looked up carpet dye too, but this wears off in time, even if professionally done. An issue with other paints/dyes. Cost for the appplication is huge, paint doesn't go very far. One thing that I did find was a gal that used the acrylic fabric paint in bottles from the hobby store. She used the extender with it and a small roller to roll on the fabric. Looked good and I know this is soft after use. So, I'm of no help with this. But perhaps try the idea above on the underside of your couch.