I too, am planning a painted white kitchen and my GC will be using some trim, crown, etc. from a local source and be finishing it himself. He said it was MUCH cheaper to go that route but it was my decision to make. This way the crown molding, base, trim will match what I currently have on some other built-ins in our open floor plan. We did order the light rail, 4" decorative posts for either side of range, and some finished end panels for the fridge and various cabinets. He has done this many times and knows where to spend the $ on the factory-finish pieces and where you can "get away with" stock pieces painted to match. He orders paint from the cabinet company. I did go to a few of his jobs and see this for myself(we are a seasonal community and these were closed up summer homes). I was very pleased and also got to see my EXACT cabinets! I decided to go with his suggestion. Appliances are here in garage, cabs come on the 18th. I will post pics and let you know how it goes! Good Luck!

Interesting thread! We built our home 15 years ago and had custom built (and I mean a single guy built them himself) cabinets throughout the house. All solid wood. Book matched. No stain--let the natural beauty of the wood show!. Maple in the kitchen. Cherry in the bar area. Walnut in the kitchenette in the lower level. They are beautiful, no doubt. My husband is a hobbyist woodworker and is a total SNOB about cabinetry. Then we bought a vacation/retirement home in northern CA a couple of years ago. Renovating it now. Here's how I looked at it. - The boxes for the kitchen cabs need to be solid, well built - If I get frameless boxes, I have the choice of changing the doors if I want something different down the road - I want a decent amount of options for designing the space, but I have long ago decided that I never will be a professional cook, and I don't need every single design feature (those of you who cook a ton deserve those clever design details!). - I wanted high end finishes (counter and backsplash in particular). - We have to spend a lot of money on the rest of the renovation and I didn't want to spend so much on the kitchen that I limited what we spent on other areas. So, we looked at IKEA. Don't be scared by the furniture. The cabinets are totally different. When we looked at what we could pay for IKEA cabs relative to other cabinet manufacturers, it was easy to say yes. We considered custom doors, but in the end we decided to do the doors with IKEA too. DH and I assembled and hung a lot of them. He is VERY handy, and he has said many times that it's all about the installation if you are DIY. We found a local former cabinet maker to finish the installation (we had to travel back home). Interesting thing is this guy, who is an amazing cabinet maker, said he can't stay in business doing cabinets any longer because he just can't compete with IKEA (this may be more true in CA than other parts of the country). Now, when I compare the kitchen in both homes, one doesn't feel more "high end" than the other. They are simply very different. Both look custom built. When we sell our current home, will 90% of the buyers out there realize the quality of our cabinets? Nope. I'm sure someone will walk in and say "I can't wait to paint these wood cabinets white". LOL! I will say that working with IKEA is easiest if there is one near you. The people in the stores seem to be very knowledgeable and eager to help. During their kitchen sales it is busy, so go on a Tuesday or Weds. And there is a learning curve when it comes to ordering. What made our process a PIA was doing it from a distance. I won't go into the gory details! Good luck with your decision!

This has been discussed longer than I've been around here. (more than a decade) First you are much more likely looking at furniture board-aka particle board than MDF. The vast majority of cabinets do NOT use MDF but an enormous number of KD's, salesman, even contractors will refer to it as MDF. (but depending on type of each they would be on practically equal footing with particle having an edge over most of what is actually used for MDF in cabinets-there are over 100 variations for each) I currently only have one brand of frameless cabinets that offers Particle Board- they also offer ply and every other brand I have at the moment uses plywood sides. I went to great lengths to get that brand specifically for the particle board option. What I tell my customer- once you are at the middle price point, top end at the box store (Kraftmaid, Shuler...) there is no point in paying for plywood except: on exposed ends if that is what it takes to get veneer, and sometimes for shelves greater than 30" wide that will be VERY heavily loaded. So I'm telling them that when they go shopping somewhere else they should be looking at a less expensive options than some of what I have. When I worked at a place that had more particle board options available I told people exactly the same thing. I used to post the physical stats from the National Plywood Association for both- for all but bending under load, particle wins. Search back a few years if you want to see those. My own kitchen is particle board frameless because that is what I wanted and fit my budget. If I were to spend more I would not burn $$ just to be able to say I have plywood. There are far more important aspects to cabinets quality than "pepsi or coke" ply or furniture board. AND once you have settled on a price point there is more to picking who you work with than which brand-who provides it for you counts for more. As to the cabinets themselves- the most important aspect of a middle of the road or better brand is customer service and QC, finish is next, methods of construction and volume come in there (how rushed are the people on the glue line is my favorite thing to see when evaluating a brand- a really accurate indicator of how things will turn out in the long run). Jakuvall

Haha thank you!!