I'd make a guess that whatever "manual" you have for Win8 would be just as useful for Win10. If that's not the case, then you should go to the monitor manufacturer's web site where they should either have a forum to help users or a link to offer tech support. You might be waiting a while before finding someone here who uses the same brand as you, and it doesn't help that you didn't mention the model that you have.
The model is I2269VW, and it works fine, but it was made in 2012, so I assume it's been sitting around a while! The box says it's compatible with W 8. I can't figure out how to adjust brightness, etc. Will try again tomorrow!
This is straight from the AOC i2269vw Manual. Just like most monitors out there, you need to use the buttons on the Side or Bottom. From the looks of the Monitor, the buttons are in the Bottom Right Corner. Just follow the instructions below if you can understand them. If not here is a link for that Website: AOC i2269vw Monitor Manual Page 23 (continued on page 24) in the manual (OSD Settings). The Arrows (< >) are showed and will move you directionally thru the Menu that appears.
Press the MENU-button to activate the OSD window.
Press < or > to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it . Press < or > to navigate through the sub-menu functions. Once the desired function is highlighted, press MENU-button to activate it.
Press < or > to change the settings of the selected function. Press AUTO to exit. If you want to adjust any other function, repeat steps 2-3.
OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.
Notes:
If the product has only one signal input, the item of "Input Select" is disable to adjust.
If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to adjust.
One of non-standard ECO, DCR , DCB, Picture Boost is activated the other three of accordingly. to navigate through the sub-menu functions. Once the desired < or >, functions are turned off
azinoh
zep516
Related Discussions
I'm stoked, I finally got the D speciosums I deserve.
Q
I need a new monitor.
Q
New monitor - help!
Q
aoc monitor 5en
Q
ruobet55Original Author
User