To follow up, the Juno lights as installed look good so far (although my kitchen is flooded with natural light right now, so I won't know for sure until it's dark out) - I took a chance but I love that there's an off/switch on each of the 3 bars (2 24's and 1 12) on the left hand side and a dimmer dial on the right, plus the on/off switch on the wall for all 3 (which are connected), so we can very much customize the amount of light is on and off each time we turn the switch on and off on the wall. or we can leave the wall switch on and use the on-bar controls. It's a lot more versatility than any other LED light that I've seen. And when on full blast the lights are pretty bright, and when dimmed they are pretty dim, so far. What I might do to get around the problem of having reflections on the shiny (Zodiaq cloud white) countertop, is use the stick-on diffusers provided with the environmental lights package, and put those on the Junos and not return them to environmental lights. One thing re environmental lights - they know their stuff, were VERY helpful and I'd love to work with them. I just prefer a dimmer dial. And Juno's customer service is not 24/7 like some electrical support shops - it's just M-F, which I didn't like as much. And the dimmer-dial LEDs we used aren't even on its website, for whatever reason. I tried to call its customer service line today to ask why they aren't on the website and make sure they still support them before deciding which to install - but they aren't available today (a Sunday). For what it's worth, the Juno bars we installed have a 5 year warranty and the environmental lights have a 3 year warranty. I'm not sure why the difference and it wasn't a big factor in deciding, but worthy of note.

For food photos go for the highest CRI (color rendering index). This is different that the K value (warm vs cool) or the lumens (brightness).

Technology being what it is, someday people will say "remember the days when you had to decide in advance what color temp you wanted your light." I just bought remote controlled color-tunable/dimmable LEDs for my living room. I had daylight LEDs in there before and loved how the room looked with them but found I was having trouble getting to sleep--too much blue wavelengths late at night. Anyway, I ordered 2 lamps with the dimming and color change circuitry in the lamp (the fixture is not on a dimmer) with the necessary remote control and have found they are working pretty well. I don't know if I would necessarily recommend this brand (iThird) based on subtle performance issues, but the technology is working for me. High K in the morning and early in the evening; lower K later in the evening to help me transition to bedtime. I don't know if anything similar is available in undercabinet and recessed lights, although I saw a presentation at work about strip LEDs for the commercial market that was actually what sent me looking for the tech for my living room.

Undercabinet LED lighting is a great DIY project... Here's what I did. Works out to about $5/ft. Links below are clickable. Here's a video below - this guy used connectors - I thought soldering was easier and cheaper. Installing undercabinet LED strips I suggest watching other videos also, search youtube on "led under cabinet lighting installation" and you will find several. I installed about 2-1/2" from the face of the cabinet to avoid shadows. You'll need 120V for the power supply. Lots of different type LEDs - brightness, temperature (color). Here's a list of the things I ordered from Amazon: power supply - $9 LED strip lights - $15 for 16 feet 26 gauge wire - $7.60 for a spool to connect the LED strips (solder) Aluminum channel diffusers - $27 for 5 pieces of 1 yard each Dimmers - $10 for 3. Optional parts. I never seem to use mine. Since then I've added LEDs to my RV, a closet or two, and plans for more.