Me, too! I've been looking at the Tea for Two, but I want a tile flange and I really need a tub that's 60"long x 30" wide, (not 32") and prefer 14"+ water depth (at least 12") and cast iron. I would love any suggestions people have in addition to the suggestions above, which didn't meet by specs for depth or are over-mount drop-ins (or similar). I would also like to comment on the above recommendations so people don't order the wrong thing. Most clawfoot tubs, including the ones mentioned above such as the Cheviot or Sunrise Specialty, have a water depth that is around 11" at most. They are comfortable, but not deep. The Cheviot alcove tub is an over-mount drop-in with a water depth of under 11". It would have a calk line around a drop off on the deck. Oh, heck no! The Toto is an over-mount drop-in also. Dang! The Waterworks Minna sounds promising, and it has an apron, but what's with that moulded raised ridge at the top? It makes it look like a top-mount drop-in and have similar problems. I guess you wouldn't need calking, but you'd have that ridge water could get over and a lump under your head if you lean back. Has anyone installed one and has pictures? I'd love to be proved wrong on this one in spite of the price! It could be the perfect tub for me if it weren't for that top detail.

Will yours be installed in an island or on the perimeter? Our problem had to do with the fittings that screw onto the faucet and faucet controller under the sink. My DH had difficulty with the install as it was so tight. Be sure to give your contractor the specs/instructions for all of the fixtures now so he can design accordingly. This picture shows the reinforced back edge of cabinet and routed edge for sink. I wish we put holes where we originally planned, between top ledge of cabinet and the reinforced area where you see the circles drawn. We were so close to the back of the cabinet it made the install very difficult. I was not able to get shots during the install as my DH was verrry frustrated. He likes it now that it is way behind him. ;) Here is the underside showing the hole for the air switch. We should have moved the holes about an inch toward the sink. Hope this helps! Let me know if you or your contractor have any more questions.

I don't have one, Holly. I'm thinking about using it if we remodel our powder room. I also found a brand called Xylem. I know it comes in a 37" but I can't find info about the counter. I like the sink--it's the same as the popular Kohler Ladena sink. The ledge seems a little shallower, but I do like the ledge on the Kohler. I also like the sink better on the ceramic Impressions better than the cast iron. Xylem:

Would this soap dish cover your sprayer hole without your needing to risk damage to the sink? https://www.lowes.com/pd/Giagni-Vernon-Brushed-Nickel-Metal-Soap-Dish/1000464137?cm_mmc=shp--c--prd--kab--google--lia--225--bathdecor--1000464137-_-0amp;placeholder=null&ds_rl=1286981&gclid=Cj0KCQjwsZKJBhC0ARIsAJ96n3V8JNs9FYlsannnAPIsI1CgBKHgNJxMsclD2AGxa_nOV8ZCgF2gPj0aArQ4EALw_wcB&gclsrc=aw.ds You could use plumbers putty to secure it in place? You could paint it black?