but you have that space on the right so it's a moot point. that's true of the 48" vanity, but we also have a 60" vanity that does hug one side wall, and we didn't put a backsplash on that one either. The material is Ceasarstone Organic White - we had a remnant from our kitchen, 3 cm, that we used for the 60" vanity, and for the one in the picture, we used another remnant the fabricator had on hand, 2 cm. We used the 2 cm remnant for both backsplashes (3 cm is too thick for a backsplash). The sink is the Kohler Archer, which we paired with a faucet from Lowe's (Aquasource brand, which might be their house brand).

Antiquesilver - thanks so much, it feels good to be back ;) I had to take a break because it was getting increasingly hard to know how off our project was at the time and to stay enmeshed in reno talk. I loved seeing the FKB recently and recognizing many names. Luckily, we have been able to pick up from where we left off and much of the work on our end was already done. The tile, paint colors and counters were about all we need to worry about this time. Most everything else is already on our premises, lol. The tough part will be to dig out each element from all the collection of boxes all over our house. We had to replace our family bath's faucet and wanted to use the one bought for the master bath since it was just sitting around. Turns out, we had to buy another one because we could not find the mbth faucet. It has been another year or so and we still haven't found it. Our house will seem so spacious when it all gets installed and sorted out! Gsciencechick - I know the tiles you mean. I saw similar in HD for a contractor I am working with to help flip a house. I could not believe that the "Big Boxes" carried them and at such good prices. That is a great way to add bang for the buck! I will be getting the black accents from HD & Lowes and that will mean fewer pricey tiles. I woke up today and told myself to stop looking for tiles. We found the ones we really want and the $350 for the border accents may be crazy, but in the grand scheme of things, $350 is not so bad for what is admittedly a splurge. The field tiles in lavender only come out to $200 and cover a lot of space. They are not really a splurge since the tab is not that high. I know in my heart I could not replicate the look with anything less. It is not for lack of trying either. I was afraid dh would choke when he heard the amount, but he asked how much we'd save with something else, and when he heard it would be $100-150 or so, he said we should go for the ones we both like better since in time, that difference will seem petty. I guess there are some things one can compromise on such a single french door, not having a front porch added, fewer (but larger) skylights, carpet instead of fixing hardwood floors in master bedroom after extending, etc, but some we shouldn't, like cheaper tiles and counters (mid-range, which is our only other "splurge"). The other stuff we chose to do without cost much more than these items' upcharges. It is work to find the balance of saving money yet still making going through this all worthwhile. We technically could save more, but if we are going to spend over $150k to get the total project done and end up looking at it as ALL a compromise, then why bother? The other things we saved on will not impact our overall enjoyment by very much. I am just so grateful we are back to doing it before too long! With so many people losing their homes, doing any of this is a splurge.

Appreciate the feedback all. I generally like the look being balanced - however, I held the mirrors up & because they are large, I really did not like the look with splitting the difference -- felt too close to the top. I left a scant 1/2 inch at the bottom to give more space near the lighting and am very happy with the look. Take a peek. Thanks so much for your feedback!

You didn’t know what you didn’t know. And that's pretty much the rule for every project where a home owner works with a professional. If the home owner knew everything, they wouldn't have to hire anybody. If the professional asks an ambiguous question, and then deliberately skips the industry-standard step of visually confirming the layout with the client, then it's inappropriate to blame the client for not communicating well. This is a question that comes up with literally every single job the fabricator does. They should know how to verify instructions. We have had all sorts of counter tops installed over the years. Every single time, the fabricator would come to the house to do precise templating. And then they'd require that either the home owner or the general contractor sign off on the template before they'd make the first cut. These processes are in place exactly to avoid this type of issue. Yes, there have on occasion been mistakes. But when that happens, the professional eats the cost or finds a way to fix things that is acceptable to all parties.