I purchased a new Elkay Harmony E-Granite Sink for my kitchen remodel and I'm anxious to get it installed. They are a very beautiful sink!! I especially love the lower sink divider since we usually just used the sink for washing larger items, putting the dishes in the dish washer.

I like Option 2, but with the fridge on the opposite wall. As it is, the leg opposite the sink has a lot of counter without a purpose. With the fridge moved, you can add drawers next to the DW for dish storage, and possibly uppers. I would move the sink to the right, so you can prep in front of the window, and add a super susan in the corner. On the new fridge wall, you can add deep cabinets, both upper and lower, so the fridge doesn't stick out so far. This gives you more storage and more counter space.

I'm just going to say this in case - the wide Domsjö is two bowl sink. It never came any other way. Sektion has standard sized drawer fronts. Buy an extra 36" wide taller drawer front just in case you need it - you can always send it back. Sektion and Akrum cabinets had different sizes of drawer fronts. Stop by the kitchen area and ask about issues with installing the Domsjö sink in a Sektion cabinet. The Domsjö should come with replacement metal bar for the front & bar edges. The front metal bar takes the place of the top bar on the front and the back. You might need to cut down the back panel to fit under the bar. We did a simple reinforcement of the cabinet by adding plywood across the back on the inside of the cabinet under the bar and then attached the official cabinet back to the ply. Given a choice, I would buy ANY other white farmhouse sink and undermount kit. Eventho it's hundreds more. In our case, the sink wasn't quite deep enough - there was a wide gap between the sink and the wall in the back that was plugged with two tons of caulk. In the end, I named the sink the Rain of Terror because it dripped water everywhere and rotted the Ikea wood counter. If you use someone else's sink in an ikea cabinet, know that you may need to cut the cabinet top back as shown in @sh's photo because a 36" wide undermount sink is 36" wide at the front or near to it. The sink maker has an undermount kit (usually) that amounts to metal bars with screws under the sink. The bars stretch across the cabinet from side to side. Then, use your "extra" drawer front and carefully cut it to fit the front.

I have a Bluestar 30" RNB. I love it. It's a cooking machine. Built like a tank. Reliable. And very predictable. It's a joy to cook on. But I also understand the appeal of induction. For our remodel I very carefully evaluated whether to get induction or keep the Bluestar gas range. Eventually, gas won. And I think I made the correct decision for our household. But I can understand other families reaching a different conclusion. The one thing I can't say enough good things about though is our new Miele CSO. It's a game changer -- especially when cooking for larger parties