Looking at your picture, it looks like you took it with the camera further back then the hole. To get a true look, the picture needs to be taken directly over the drain and not just over the center of the sink since the hole is towards the back. Anything that is less then 100% directly over the hole will start to look misaligned since the grate and sink are at different heights and you get the angle effect. Even if it is a 1/4 inch off, I say no big deal and its just one of these things we have to live with in life at times.

you might want to call them and ask if they have a photo of the style, or link, they can email you. i've called them three times on various items and i can always ask to speak to the same guy on the phone. it's like there are only three of them working the phone, at least that's my impression--so you can get the level of service you expect in a small company, but with large inventory prices. it wouldn't hurt to ask!

I have one. I have had it installed for a little less than a year, but I have really worked it. It cleans up very nicely, so far pot marks just wipe off, but if I get any kind of set in stain, I use a little bit of Comet, and it is good as new. I usually just use a dish brush and use my pullout faucet in spray form to clean it. Keep in mind that it is a quartz composite sink, so it does not feel like fireclay, if that is important to you. For some it may be too plasticky feeling, but it just feels silky to me. I have a garbage disposer installed on this sink, and we made certain that the disposer is also supported from the bottom, so to not put too much stress on the sink, Even though the company claims that it is GD safe, we were concerned that our heavy 1HP GD would pull on it, and over time, leave little stress cracks. DH has seen many Corian type sinks with stress cracks, so he thought that was a valid concern. Anyway, I really love my sink. It is huge to me. Mine is the 30" single, which is 30" x 20" X 10" deep. Here is a pic of it from the front: And here is a photo of it "in action" For a little perspective--the cookie sheet on the bottom of the stack on the left is 13" wide and 17 3/4" long: A few other GWers got this sink around the same time I bought mine and installed it several months before we installed ours, but I cannot recall who and don't know if they are posting here still. I bought mine from Bob's Faucets and Things. He had the best price, and he has a store on ebay as well. Hope that helps!

I have been reading many positive reviews on this site regarding Ticor SS sinks from GalaxyToolSupply... for those of you who have owned long term in years... are you still happy with? I have been reading reviews on-line that they tend to scratch easily. Did you find this to be true?