Hi Pam, First, I'd just like to say that Gary is fantastic and his plants are the best. And, by the way, Bugs Bunny is one of my favorite sweet potatoes. So, even if this year you see mixed results, I strongly encourage you to plant sweet potatoes again in the future. I had to try them in several places in my highly variable garden soil before I found the area where they grew best. With mostly dense, slowly-draining clay, it was a real challenge, but in the sandier and lower fertility soil at the west end of the garden, I finally found a place where they thrived for several years. Sadly, shade from large trees outside the garden now has shaded out that area in terms of it being suitable for sweet potatoes, but I broke ground on new sandy/silty soil this past spring where I intend to plant sweet potatoes next year, and there are no trees nearby that can eventually shade out that area. There are various reasons why sweet potatoes sometimes don't produce tubers. Look first to your soil for answers. Since sweet potatoes are a root crop, the success of the crop is strongly dependent on the soil and how the crop is managed. Soil and crop management impacts the size and shape of the tubers, their overall quality and the yield from the plants. It is hard to generalize because some varieties seem more tolerant of clay soil than you'd think, but in general sweet potatoes will produce a crop in almost any soil as long as it is drains well. Sweet potatoes grown in poor sandy loam soils tend to produce low yields of smooth, high quality and sweet potatoes grown in rich, clayey, heavy soils will produce high yields of rough, often misshapen, poor quality roots. Whether the soil is rich or poor, if it is slow draining and stays too wet for too long, it will produce sweet potatoes that are rough and misshapen and often have rough, somewhat unattractive skin. So, what we glean from all of that is (a) well-drained soil is essential and (b) you'll get the best crop from well-drained soil which is sort of 'medium' in texture and fertility---not too sandy but also not too clayey or too rich. For me, it is easier to start with sandy soil and amend it with a moderate amount of organic matter to increase its fertility and to help it hold adequate moisture than to start with heavier clay that is harder to amend. In order to get good sweet potatoes from my clay soil I not only add organic matter but also sand. My clay is very dense and slow-draining to begin with though. There are many clay soils that have a good percentage of sand in them and they don't have to be amended that much for sweet potatoes. So, look at your soil and see if you think it is too sandy/low in nutrients or too rich but maybe also too dense and slow-draining. I've always felt like if I could just take a gigantic kitchen-style mixer and mix up the sandy soil from the west end of the garden with the heavy clay from the east end of the garden, I'd have perfect soil, particularly for sweet potatoes. Usually when people grow sweet potatoes and get small, stringy roots/tubers or only stringy roots and no tubers instead of larger, fleshy ones, the issue is that the soil is too fertile. Sweet potatoes are one of the few crops that do poorly on very fertile soil. You also can get a low harvest if the vines root into the soil (or mulch) as they grow, which diverts attention to growing more, more, more vines and not so many roots. I am not sure where your soil is on the pH scale, but sweet potatoes grow best in slightly acidic soils with a pH between 5.5 and 6.5. However, I grow them in soil that varies from 7.0 to 8.2 in pH, although that isn't ideal, and I'm constantly working to bring down my soil pH. You didn't mention if you used any sort of fertilizer with the plants, but most sweet potatoes will need some fertilizer although not too much, although that's more true if you have a sandy soil or sandy loam than if you have clay soil. Clay soil usually has adequate fertility because it is high in minerals. It is hard for me to define what a good harvest is because it varies wildly depending on the soil, water and even the variety. However, when you dig your sweet potatoes you should have several large sweet potatoes and also usually a handful of smaller ones underneath each plant. In a good year with adequate soil moisture, sweet potatoes in our garden make a big crop. Some varieties produce more than others. How big they get is going to vary depending on the variety, when they were planted, how hot the summer was (if it is too hot in combination with low rainfall, the crop is smaller), etc. Often in very hot and dry summers the plants produce poorly or they are slow to form tubers and you have to give them more time than usual in the fall to size up their crop. While they are very heat-tolerant, they really aren't very drought tolerant. You find yourself walking a fine line between watering them enough to get good production while simultaneously not watering so much that your yield is poor. Knowing how much moisture they need in your specific soil and weather conditions is one of those things you really only learn from growing the sweet potatoes. Does variety matter? Well, of course it does. That's why commercial growers only grow varieties that produce high yields. They have to get a certain amount of lbs. harvested per acre in order to make money. How much does variety matter? In good conditions, I don't know that it matters a lot. Several years ago I trialed a lot of sweet potato varieties from Duck Creek Farms and almost every single variety produced very well. They all were in the same area, in the same soil and received the same moisture. I didn't look at a single variety and say "that doesn't produce well, and I won't grow it again". I was pleased with all of them. For me, the place/time to make decisions about what variety to grow again comes down to which ones have the flavor and texture we like the most. I don't know that cutting back the vines would help improve the yields, but my instinctive answer is that no, it would not. Remember that plant foliage serves as the photosynthesis factory that provides the plants with the energy they need to grow and produce. Any time you cut the foliage, you're reducing the amount of foliage available to conduct photosynthesis. I don't cut the foliage back at all. I am very careful about keeping the vines from rooting into the moist ground or mulch as they grow though. I generally use a rake (never my hands because we have venomous snakes) to gently move the foliage around every few days so it doesn't sit in the same spot on the ground all the time and start rooting. In the year I grew all those Duck Creek Farms varieties, the foliage ran everywhere, including climbing the 8' tall fence and growing through the fence and into the flower beds on the other side of the fence on the west side of the plants. On the east side, the vines grew across the pathway and through the tomato beds and wanted to climb the cags, which I didn't allow them to do. They all produced great yields, so if too much foliage is a problem, then I wouldn't have gotten high yields. Centennial, by the way, was one of the best producers that year. I should qualify that statement by saying that if they are producing heavy vines on soil that is low to moderate in fertility, that seems normal. However, if they are growing excessive foliage in excessively fertile soil that is "too fertile" or had too much fertilizer added, that is a problem because they will tend to stay in a state of vegetative production and won't produce tubers as well. Once again, you have to grow sweet potatoes for a few years in order to learn what level of soil fertility produces the best yields. There is no easy answer to the question of how much fertility is too much, but you'll know it when you see it because you'll have excess vines and low yields of roots. Often, we get impatient and want our sweet potatoes to be ready to dig when we are ready to dig them. We have to be patient and dig them on their schedule, not ours. To ascertain if the plants are ready to be dug, I dig gently in the soil around the roots---I start about 8-12" away from a plant and dig with a hand trowel. I dig in closer to the plant as I look for roots. When I find them, I look at them to see if they are sized up large enough yet. If they are, I go ahead and dig. Otherwise, I replace the soil around the plant, pat it down firmly and water to settle it back down around the roots. I usually won't dig them unless there are at least a couple of very large tubers per plant. I have harvested in October some years, but in my specific growing conditions, I get the best yields if I wait until very early November and harvest a couple of weeks before the date of my average first freeze. The difference in harvest from an early October versus early November harvest is significant most years. I know this because sometimes I dig some in October and leave others of the same variety another month---as an experiment to see if it matters. One factor that might be important is the amount of heat/drought in the summer months. If rainfall was very scarce in July and August and we had excessive heat, I get lower yields so leaving them in the ground another month in autumn's cooler, milder and usually wetter weather gives them more time to produce more roots. It all hinges on the weather though, because if autumn brings very heavy rains very early in the season, I'd just as soon dig the potatoes I have because the very heavy rainfall for weeks on end can cause splitting and cracking. By the way, I do not cut the vines until the day I harvest. When I am digging down into the soil to check the status of the plants and to see if the potatoes are a nice, usable size, I just move the vines out of the way and take great care not to break them off. Once the vines are gone, if you leave the potatoes in the ground, the plants' energy is going to go into trying to grow more foliage, not more roots. Hope this helps. Dawn

Hi KSWL, No, it's not. ::: head exploding ::: Yesterday they called me and said "hey, we were thinking, that since this paper is going over plaster, which is not as smooth as drywall, we should use a liner paper". Umm, yeah! So at least they are starting on the paper! We just came back from 5 days at the house. There is still a ton to do. I don't know why. We have five bathrooms and none were totally done. All of the toilets worked, thank goodness. But one bathroom had a sink, working, but no mirror up. The other had a mirror, but no taps, etc etc. Three had showers, but two of those have no lights. You had to wonder in and out of a few different bathrooms to get ready in the morning. As people, I like my contractors a lot. And they are very organized and meticulous and financially transparent. I appreciate all of that. But, they are behind schedule like contractors always are, and it is infuriating. Aside from that, we are very happy with our decisions. The third floor looks great, and we added 2 full baths there, both fairly generous and pleasant. The MBR suite came out nicely, and we can't believe we ever hesitated with adding the deck there. It is fabulous and makes the room. I'm also loving my unfitted kitchen.

They make clips for duvets? I always just use safety pins through the seams. Honestly, and it works just fine. Typically use IKEA inserts. I heart duvets, both used as intended, and used empty as a bedspread. Tina - Is a duvet insert the same as a down comforter or down comforter alternative? A duvet cover is the outside. The insert is whatever you want. Some are down, some are down alternative, some are poly, etc. Think of a duvet cover as a slipcover for comforter guts, or an ugly comforter you would to give a facelift to. Now on to some stuff posted earlier... Bedding labeled as "machine washable" does not necessarily mean it is. Sure, you can toss it in and it will probably come out in one piece but I did that once upon a time with my first "real" bedding set (about $550) and ended up with a comforter that looked like a big sock full of melons. The filling balled up terribly, and I absolutely could not get it smooth again. Lumpsville! It wasn't unusable, but it was horribly unappealing. Which is how I happened upon duvets. I ripped the top seam, re-seamed the two layers separately, pulled out the stuffing, added snaps and shoved a cheapo comforter inside. And just in case someone out there doesn't know this, because of all the things the internet is not, phonetic ranks near the top... ...it's "doo-vAy" (rhymes with hooray) not "duv-it" (rhymes with covet)... as I smartly asked for once in a Pier 1 store. :(

Oh wow thank you all! So many options for the blue boy! I do think a lumbar pillow is the best option. @salonva the chair is a little big for the corner I know. But I am happy with it there. @Donna T the artist is Kanayo Ede. He has an Etsy shop I believe-I purchased through Robert Kent gallery in Georgia. Here it is full frame. Loverly. Here is Mary (from the Christmas song “Mary Did You Know”). She reflects in that mirror as I exit my bedroom straight in front of the chair. She is from artist Dan Campbell. I’m off to look at some fabulous pillows! Thanks again!