gardenmommy When the plants are in the pots I use shish kebab sticks for support, about a dollar for 100 at Walmart. I lay them out on a newspaper the number I need and a few extra. I lay two side by side with a 3 or 3.5 inch overlap and drop a few drops of wood glue where they overlap, let them set overnight. I use 12" bamboo and end up with a 16 or 17" mini stake. I tie the plants to them using knitting yarn. This keeps them straight up, safer to move around and easier to plant without having them flop over and break the stem. I had that happen. I usually don't stake the plants for two weeks after we plant so they need the support against any wind. One day several years ago I was thinking about making small sticks and then I thought of shish kebab sticks. I do use wooden stakes and binder twine. I have a dairy farmer that saves a box of used binder twine from bails for me in the spring. I cut the twine in hundreds of 2 1/2 feet lengths. When the plants reach about 3 or 4' high, I wrap a piece of twine twice around the stake, this keeps it from sliding down, 6" or so above the top of the plant. This allows two ends to tie to. For the shoots, I find a Y at a branch and wrap an end of twine around it twice below the Y and tie it, not to tight. Pull that twine up and tie it to one of the ends tied to the stake. This allows two ends again to tie to. Repeat, repeat repeat. It's a time consuming process especially when the plants grow and produce many branches. It worked well as you can see but I may try a binder twine lattice this year. We plant two plants in a hole so lots of shoots/branches, you have one plant, 22 plants might take you a good hour at the peak of the season. One Saturday I spent 2 1/2 hours tying up those two rows. It's not that pretty but I don't care about pretty. At the end of the year a box cutter will zip the twine right off. Try it on a couple plants, it is simple, inexpensive and very affective for the growth of the plants and for keeping the tomatoes from pulling down and breaking the shoots. The plants we raise are Burpee Delicious where four or five large tomatoes can be in a cluster weighing several pounds. The twine does a great job holding them up.

Okay, I know that it's easy to get around the disable-right-click code, because I've done it myself. However, I'd still like to know if this code I'm using is correct, because I put it into my sites, logged off, emptied all cookies and temporary files and history, and so far it doesn't work. This is the code that was given to me from a friend, and I used copy/paste so I know I didn't forget any part of the code (of course this is all enclosed by and >, with "" instead of "[" or "]". Is this the right code to use? I put it after the "body" code.): script language=java-scriptgt; [!-- /* Disable right mouse click Script (By Crash @ http://walk.to/crash) Submitted to and permission granted to Dynamicdrive.com to feature script in it's archive For full source code to this script and 100's more, visit http://dynamicdrive.com */ var message="Amy L. Howe"; function click(e) " if (document.all) " if (event.button == 2) " alert(message); return false; ] ] if (document.layers) " if (e.which == 3) " alert(message); return false; ] ] ] if (document.layers) " document.captureEvents(Event.MOUSEDOWN); ] document.onmousedown=click; // --] [/script

The instructions below will show you how to add a photo within any message box on GardenWeb and on our forum, Gardening In Arizona. Adding A Photo Within A Message Box » You first need to upload your photos to the Internet using your own personal website or using a free/paying photo storage site. Several sites are and . There are many image hosting sites on the web. Follow the uploading instructions provided for the particular image hosting website. Some services do not allow displaying images stored on their site on other pages (like GardenWeb posts), some charge an annual fee, and most limit the amount of images stored, so be sure you choose a service that fits your needs. Image hosting sites mentioned are examples of possible options, and not endorsed or recommended by GardenWeb. #&187 Make sure your files end with .jpg or .gif. Try not to make your photos really large. 500 pixels x 500 pixels or 4" x 4" is a good size. » Next, type within your messag the following - replacing "nameoflocation" and "nameof photo" with your information. » Now Review Message again and see if your photo shows. If so -- submit the message. Adding a photo using the Link method. #&187 After you type in your message, click Review Message and scroll down. You will see a place to add a link. Copy and paste any link from the Internet or photo URL address into the top space. Then type in the Name of the link below it. #&187 Hit Review Message again and make sure the link shows. You can also check the link to see it it works, then use the BACK key to get back to your post -- if its okay -- hit submit message.

It's frustrating to many newcomers to see all the posts with photos included in the text and have no idea how it's done. With this FAQ I'm attempting to explain the process so posting photos will not only be possible, but will be easy. The first one is the hardest; after you've got the method in hand, posting photos will be routine. The FAQ is excerpted from a series of threads where various forum members contributed valuable information and commentary. The threads got heavy with discussion, all of it useful but maybe hard to wade through if you just want to get a photo included in your post and don't really want to know the nitty-gritty. I'll give the SHORT and the LONG of it so you can take what you want and ignore the rest. ------------------------------------------------------------------------------------------------------------------------------------------- THE REALLY REALLY SHORT OF IT: 1. Get the photo onto your computer desktop, by digital camera or scanning or whatever. 2. Upload the photo to a web-hosting site; either by opening an account (Picasa, Photobucket, etc.) or by using a site that doesn't require an account (such as TinyPic or imgur). Pick a reasonable size for posting like 640 X 480 pixels. 3. From the list of codes on the website, pick the HTML code and copy it. DO NOT copy the IMG code. It won't work on GW. 4. Paste the HTML code into your message. 5. Preview should show the photo included in your post. ------------------------------------------------------------------------------------------------------------------------------------------- THE LONG OF IT FOR THOSE WHO WANT TO KNOW MORE: 1. OVERVIEW To post a photo you need a digital camera that you can connect to a computer or a smart phone with internet access. Using a digital camera you transfer the photo to the computer, then you upload that photo to the internet using your browser. You can either upload to a photo hosting website and then post a link to that site on Garden Web, or you can upload directly on some forums. If you have an iPhone you can email a photo directly to the internet, without using a computer. PDF files on your computer can also be uploaded to the web. In a pinch, you can always photograph a set of drawings and then upload those photos. Once you have the photo somewhere on the internet, you have two choices for Garden Web. You can post a link to the website URL in the Optional Link URL box at the bottom of your message (don't forget to name it in the Name of the Link box), or you can post a link in the text of your message that links directly to your image on that website. The website URL is on the top of the page; the image HTML code is somewhere on that page. ------------------------------------------------------------------------------------------------------------------------------------------- 2. WEB HOSTING SITES, ETC. These are the most commonly used methods to get a photo on the internet: You can use a web hosting site where you can set up your own photo albums (there are many, such as Photobucket, Picasa and Picture Trail) or you can use or , which are basically web photo transfer sites, Some forums allow direct upload to GW, but the size is limited. *An advantage of the hosting site is that you can set up a page with many photos on it and organize them by topic. A great example is sedum37's site on Picture Trail (see the Flora in Winter thread). *A disadvantage of the hosting site is that you have to set up an account, which some people may be reluctant to do. *An advantage of and is that it's very easy to upload one photo and link to it, and you don't have to set up an account. *A disadvantage of and is that you can only upload one photo at a time, which is not useful if you want to show many photos. *An advantage of the hosting site is that you can post thumbnails (a thumbnail is a small pic that is clickable and the click directs you to the full-size pic in the album on the hosting site). This is good if you want small details like dimensions to be readable. *A disadvantage of is that you can't post a thumbnail or click on the pic and get directed to a larger file. If you do click on the pic, you'll just get directed to the main TinyPic site. If this really annoys you, you can use the "direct link for layouts code" or go to . You still won't get a clickable pic, but you'll avoid the advertising. Thanks to wendyb for this tip. Whatever method you use to get your photo on the internet, you still have the options of posting a link to the website (in the Optional Link URL box) or posting a link to the image in the body of your text. ------------------------------------------------------------------------------------------------------------------------------------------- 3. DOES SIZE MATTER? It's important that the photo be within a certain size range by the time it gets to Garden Web. In a previous thread, DtD mentioned loading time as an issue, and mad_gallica explained it thus: "When talking about 'size' of a digital photo, it can refer to two separate, though often related things. The physical size of the picture on the screen, and the file size of the information necessary to show the photo. Physically large pictures mess up the thread formatting. Large file sizes are the ones that take forever to download." She gives some good examples in the 7/10/11 thread. Summarizing, there are two effects related to the size of the photo as posted. 1. Physically large photos mess up the readability of the thread - you have to scroll back and forth and back and forth to see both text and image. 2. Big photo files with lots of information load slower - you have to sit around tapping your feet (or go wash the dishes) waiting for the pic to show up. Somewhere along the way when you're moving that photo from your camera to the internet and then to GW, you will be given a choice of resizing the photo, which is usually huge as it leaves the camera. Way too big for the forum. Desirable sizes are either "thumbnails" which some hosting sites provide, or something close to 640 X 480 pixels. "Medium" or "Small" varies from program to program, so don't rely on it. (see corunum/Jane's discussion in the previous thread). Thumbnails are small pics which will link to a full-size pic in an online album. You may incur the wrath of other Garden Web members if your photo is larger than 640 x 480 pixels and thus becomes very difficult to read. Remember that your post may look fine in Preview in the window on your monitor, but others may be using computers that show a very different view. If it becomes too difficult to read, people just give up and they'll never see your images. ------------------------------------------------------------------------------------------------------------------------------------------- MORE FORUM COMMENTS diggingthedirt (on an earlier thread) adds this reason for using Picasa: "Here's why I like google's picasa web more than the option: If I select a small size for my photos when I post them via picasa, you can click on them and be taken directly to the larger size photo in the picasa album. If I click on a small tinypic photo, I end up at a page that offers me an account at tinypic; the original photo is nowhere to be found. The small size Carol used (320px x 221px) seems really useful for threads where there are a lot of images. I often use an old laptop with limited graphics memory, and loading an image-heavy thread takes a VERY long time, and makes my computer behave badly. So, yes, the photo-hosting site is a personal choice, but there are a lot of details to consider when you choose!" In previous threads wendyb gives good tips on HTML code and the use of and . One such comment is: "The reason upload does not take you to the picture if you click on it is because using the HTML code that they provide, sets it up that way intentionally to bring you to a new account page. I never use their html code. I use the "direct link for layouts" code and add the required html img src= around it." ------------------------------------------------------------------------------------------------------------------------------------------- 4. EASY WAY TO GET STARTED That said, I use TinyPic myself to include an image in the body of the text. I suggest you try TinyPic at first so that you can work out the bugs and get confidence that it will actually happen. Once you've mastered this, you can explore hosting sites to find whatever suits you personally. You don't have to set up an account at a hosting site if you use . 1. Transfer the photo from your camera to your computer desktop. 2. The photo files on your computer must be in a format such as jpg, png, gif, base 64 encoded image, or bmp. 3. Using , you hit the "Choose File" button and it searches your computer desktop. 4. Choose one then select a size (640 x 480 is good)("Resize" button). Note that choosing Thumbnail (160x120) just gets you a small pic; it won't be clickable. 5. Hit the "UPLOAD NOW" button. Before it will upload, you will have to enter the annoying scrambled code, then upload will proceed. When the file is uploaded, click once on the top code (labeled 'HTML for websites') and it will automatically be copied to your clipboard so you can paste it. Don't use the IMG code, it doesn't work on Garden Web. 6. Paste the HTML tag in the text message of your post, not in the "optional link URL". This is the easiest way I know. Claire