SHOP PRODUCTS
Houzz Logo Print
jitan2004

My pool light

jitan2004
15 years ago

I have two pool lights. One of the pool light went out. I removed the pool light base on the instructions I found from a website. Basically I remove a screw, pull out the light, remove the light cover, replace the bulb.

I made sure new bulb matches the original. The spec is 12V and 100W.

Before I put all back together, I try to test the light and found that it was not working.

I used the voltmeter to make sure the new bulb is good and I have power when I turn the pool light on. Seems like everything is in order. I have the power, the light bulb is good but still no light. Not sure what to do. Please help!

I even try to jump the power to the bulb using two cables to see if the new bulb is not sitting on the base correctly. Still no light.

I also took out the working light since I have two in the pool and try to test my new light and check the volt with the voltmeter to make sure the voltage matches.

I found that new bulb works and voltage matches with the one that is not working.

I am running out of ideas. Please help!!!!!

Comments (2)