It has been a long road, we started this project Oct. 2006. We've learned a great deal from the forum and our pool is not quite finished. They are plastering the Spa today. We went with a PB due to DH's schedule. It ended up using almost as much of our time as an owner/builder. We would not use a PB again.
Specs:
520 sq. ft. pool surface area
57 sq. ft. spa surface area
10 Waterway Jets in Spa
2 Waterway Jets on Bench in Pool (Run from Waterfeature pump)
50 x 52 screen room, 39 x 12 covered patio
Bishop's Hat Pavers, Figaro Pattern, Peach/Coral/Huntington
Red Bullnose Coping
Sta-Rite Max-E-Pro 1.5 HP Uprated Circulation Pump
Sta-Rite Max-E-Pro 3 HP for Spa
Sta-Rite Duraglass 3/4 HP for Waterfeatures
2 Deck Jets
Fountain in Spa
300 Sq. Ft. Sta-Rite System 2 Mod Media Filter (PLM300)
400,000 Btu Sta-Rite Propane Heater (HD Cupro Nickel Heat Exchanger)
Overflow line, no autofill
PS-8 Automation
SWG
River Rok Baha Sand Pebble Type Plaster (40% Emerald Black, 60% Lucayan Blue)
Mosaics from Local Tile Company
Water is a bit green as we just finished filling yesterday, balancing starts today.
We will continue add more pictures as we finish up.
Would love to hear any comments.
Here is a link that might be useful: TheReid's Yahoo Photos
madelineg
thereidsOriginal Author
Related Discussions
pesticides and CA redlegged frog
Q
My Potagers 2006 & New terraced garden 2007
Q
June Roll Call - Where Is Everyone At On Their Build?
Q
Housing Slump Continues...
Q
scrapula
houseful
kristenfl
dischnell
thereidsOriginal Author
estjohn
beachdiva