First of all, you do not need to learn how to work with Camera Raw format. That format offers you abilities to do work on an image that a JPG doesn't, but if you mostly want to publish photos on the Web, then working with good quality JPGs is going to be quite sufficient. And yes, digital cameras all produce some degree of "noise" in images. It works pretty much the same way as film does: the higher the light sensitivity (ASA) the more visible the grain or "noise" becomes. So if you are setting your camera with a very high light sensitivity, 1600 ASA for example, the noise ("graininess") in the photos will go way up. Setting the sensitivity as low as you can is always advisable as long as it doesn't compromise your getting a sharp, clear image. Getting a good image depends on three basic factors: 1) shutter speed - the duration of the opening of the shutter must be as short as possible, within reason, to eliminate any motion of the subject or shaking of the camera operator's hands. Generally you want to use a shutter speed of at least 1/125 of a second or less. 2) depth of field - this controls how sharp the photo is by determining how much of the subject from closest-to-camera to furthest-from-camera is within the range of focus of the lens. Depth of field is determined by how small a lens opening (aperture) you set. It is usually a balancing act between shutter speed and aperture to get lots of depth of field and still use a fast enough shutter speed to eliminate any motion. Most inexpensive digital cameras don't allow you much (or any) control over these settings and simply make a decision for you. This isn't always ideal, but you may not get a full range of features from a camera in your affordability range. If possible, look for a camera that does allow you some manual control. 3) image quality settings - set the ISO/ASA ("film speed" or light sensitivity) as low as lighting conditions will allow. I personally enjoy shooting under overcast conditions which I feel best displays the full range of color of flowers and eliminates hard shadows and highlights. On a cloudy day you can often get a much more painterly look than a bright day. This means you may have to set the camera's light sensitivity to a higher setting, like 400 ASA/ISO or even higher, in order to get both a fast shutter speed and reasonable depth of field. (Keep in mind that depth of field is optional for some kinds of photos: sometimes you don't want everything to be sharply in focus from front to back, and so you may want to shoot with the lens wide open = very little depth of field) Under cloudy conditions I will often set the camera sensitivity to 400 or even 800 if necessary. If you are very lucky and the air is very still, you can use a tripod and leave the ASA/ISO setting way down at 100 (or however low your camera allows) and when you do that, you are reducing the "noise" in the image to minimum. I work exclusively with a Nikon D80 and I find that at its lowest ASA/ISO (which is 100) I can get a very large image that shows next to no noise. Even when I turn up the sensitivity to 800, I can still get a very good image with very little image noise. Its only when I turn sensitivity up to 1600 or more that image noise becomes very noticeable. A few other points: Jeri mentioned image editing software. Your needs are probably going to be very basic at the start and so perhaps Photoshop Elements might be all you need. I'm not sure what other tools might be available in the cheap-to-free range. I gather that Google's Picasa offers the basic photo editing tools. See link below. If you are up to grappling with a fairly steep learning curve, there is a free Photoshop type editing suite called The Gimp and it is almost as powerful as the full Photoshop suite, minus a few of the tools and filters. There are plenty of tutorials online to help you learn how to use it. Also, as Cass mentioned, if you are working on an OS X iMac (as I do) then you can do many image manipulations using the built in iPhoto tools. I can't tell you much about iPhoto though, since I use Photoshop CS4 as my tool of choice. If you can get your head around the idea of buying a used camera, you will undoubtedly get a lot more camera for your money. You might be lucky enough to get a DSLR for what you have to spend. I sold my Nikon D70 two years ago for less than half what I paid for it and the person who bought it got a really good deal. It was an excellent camera and I'm sure it still has years of service in it. So, you may want to consider buying second hand. People often sell their current camera to upgrade to a newer, more capable one (as I did) and there is absolutely nothing wrong with the camera they are selling, they just want to move up a level. Finally, if you already have an understanding of the basics of film camera photography, then you already know most of what is important in digital photography. All of the same basic principles apply to both, its just a matter of learning how to use the specific camera controls to get what you need from a digital. No need to be intimidated by digital imaging, especially if you have a friend who cam teach you along the way. Regards, Paul B. Here is a link that might be useful: Picasa

I think first you have to define what you mean by "set up". The cameras mentioned here are probably all easy operation, which is only one step in a chain. Once you have taken the photos, you must be able to view, sort and save. To get pictures from the camera to the computer. I remove the media (small disc - there are several formats) from the camera and use a USB card reader (make sure it matches the media!). The reader plugs into your computer using a USB port. Usually the computer will recognize and load the reader once you plug it in. The windows XP operating system is very photo friendly. It will recognize that you have inserted a disc and will ask you what you want to do - copy, move, print & view. You can view individual files by clicking on them to open, or right click on them and select preview. Most files are .jpg files and the computer should see the extension and know what program to use. Do yourself a favor and make sure to copy all your files to a CD and do not plan on storing them all on your hard drive for long term - you WILL run out of disk space. Microsoft photo editor comes with XP, but is not a very good photo editing program. I use Photoshop CS, but it is very expensive. There are lots of other choices including free downloads, or software that come with printers or scanners. I cannot recommend any by name, because I don't use them. I do know photoshop Elements is a reasonably good program - cost $60-$80. So now you have photos on your computer, what is it that you want to do with them?

We have the same plaster problem and found a gorgeous set of 2 battery-operated sconces at QVC for 50.00. Real frosted glass shades and dark brown ( almost black ) real metal base and they're not cheap-looking by any means. They flicker like a real flame and cast a nice ambience glow of amber on the wall. Everyone who sees them in action think they're real gas lights. Contrary to the above posting...they have a battery life of about 500 ( yes FIVE HUNDRED hours ) I've had mine for almost 5 months and leave them switched on unattended for many hours at a time and batteries haven't needed replacing yet. Find them at QVC : Item Number H0835 Candle Impressions S/2 Flameless Wall Sconces w/Glass Shade. You'll love these wall sconces !

I have the Kodak Easy Share, also, with a memory card. I've found it's important to use lithium batteries (photo batteries)--they last a MUCH, MUCH longer. Janice, mine takes a moment to reset, so it isn't like an old 35mm manual that you can take several shots/second, but it isn't bad. Uploading is easy, and I can use the memory card to print directly from the printer (not uploading to the computer!).