I love the first and last stripe! I like the way the line draws your eye up and the last one is simple enough to not compete with the rug or the armoire. the one I picked was tough; there were so many that had your colors in them at Horchow! That one seemed to go more with your rug (which looked red, gold and brown on my monitor!)because it didn't have any green, but in the end I was thinking it had a subtlety that might work. having all of the colors represented is probably your best bet, though- it definitely brings your eye all the way around the room in a nice way. IMHO, you can't make your walls look too tall. Drawing the eye up is almost always a great thing. And I think some height will balance out the weight of the armoire as well. but only you can see how things look in person! clearly you have great taste!

You could use a much shorter lamp there to get rid of it blocking the view. However, it seems like a piece of art centered on that wall might not work......... that wall is basically the dividing line between two different rooms, right? (Yes, it's a great room... but the way the furniture is.... it just seems divided.) I would be confused about what to put up for that reason alone.... :) Personally, I would do a grouping of mirrors.... Something hung like these "Garden District" mirrors from Ballard: I'm not sure if the dimensions on these particular ones are right for your space, but I think something similar could work and look very nice.

Have you looked at their Facebook? There are a ton on there. I wish there had been that many when I first bought last year. Here is a link that might be useful: craft art wood countertop facebook

I don't have a functioning camera right now to make an electronic photo file, but will remark that it is easiest inside a nice cabinet to use combinations of pex tubing and push to connect fittings such as Sharkbite brand (among many others) to avoid sweat soldering damage. All that is needed is a means to cut the pex to a clean flat end. Mistakes are easily remedied by using a different size piece of pex. Adapters exist to go from the pex to the fitting that dangling faucet hoses use. 3/8 poly line along with John Guest type push to connect fittings will be good for RO lines or such. Pex and poly are at their limit when used for pressurized water at boiling temperatures, so the hot water source in the house needs to be under some form of temperature control. A boiler type of water heater with potential for overshoot to 220 or so would be a risk in my view without a working moderator (required anyway by code). Some water chemistries tend to degrade the modulator so that needs to be kept in mind. My primary sink cabinet base includes garbage disposal and DWV plumbing, stand pipe for dishwasher hose, hot/cold feed for main faucet and to moderating valve for dishwasher (gets mix of hot and cold). Also there is the touch faucet control box, the fiber-optic garbage disposal control box, and quad electrical outlet. RO connection to both hot and cold sides of a pull-down faucet are present. All of the plumbing is mounted on stand-offs on the back or side walls of the cabinet base. kas