My account is suspended again. If your email is blocked I can't contact you. Sheeplechase, your email is blocked. Email me directly at kcmccoyesq@aol.com This will probably be fixed shortly, in the meantime sorry for the holdup.

Make sure they test for Coccidia...sometimes they don't check for that and just look for worms... Yes we will indeed have his stools checked for Coccidia, thanks :o) You know usually stress isn't the cause the diarrhea, it is usually something that was already there and the stress has lowered the immune system just enough to set it loose.... Does that make sense?? yes, totally, the same thing happens with hamsters but mostly Syrians. Syrians get wet tail because something shocks their immune systems when they are moved long distances. The bacteria are there but it doesn't strike them hard until they are stressed. Are his eyes clear and sparkly (no gunk)? his eyes get gooky when he goes out in the bitter cold but otherwise they are clear and no sign of infection, scleras are white throughout Is his nose runny at all...dripping?? No,no drips at all, dry most of the time and cold and damp when he comes in from the cold but dries up again What color are his gums? Should be a nice pink, not too pale.. very nice pink and well hydrated...been checking for that Does he feel extra warm? (normal is around 101º) no, normal How many rounds of shots has he gotten? one round of shots on December 19th In consideration of his breed mix, I would make sure to time his last distemper/parvo vaccination to be given after his 16th week of age (at the same time as his rabies vac). ok...what is the rationalle for that, just curious Did he get a vaccination immediately before you took him home? no, almost a month ago How old did you say he was?? 9 weeks Do keep me posted...I certainly get anxious when I hear the words "sick puppy"...aak! well, I really don't think he's sick with a fever or anything but he could still have something in his stools, so we'll have that checked. He's playing like a kitten, pouncing on sticks and leaves and chasing after toys and generally either getting into trouble or looking for attention...typical puppy stuff. He is napping much better now. He'll nap for a full hour now whereas he was only taking 10 minute cat naps before and crying a lot. Today there was no crying at all and he is back on his food eating about 50/50 steamed rice and dry chow. One thing I thought of was that darn oil tablet the lady gave him at the rescue. I don't know how long she'd been giving it to him but those things are big and I'm sure it was like giving him cod liver oil twice a day. I've discontinued that entirely and today he is having better formed poos and not feeling the urgency to get outside. Ugh! It's a horrid day today... freezing rain so the deck where I was letting him out is thick with ice and the poor thing is terrified. I am too...afraid of falling that is so now I have to trapse him through the garage and out the back garage door onto MORE ice but at least if he falls he will fall only the ground and not off the edge of the deck. I'll pop back in with at "Pupdate" later and let you know what a second slide of his stools shows. Thanks so much, Barb & "Lake" When I foster puppies, I always have my vet tech/or vet if necessary on speed dial!! LOL!! I have the whole routine down...

Kerdi Update: I've gotten a couple of emails regarding the newer "Kerdi-DS". First, emails. I often get emails sent to me through the G'web email system, and because of the sender's setting on his/her G'web account, those emails can not be replied to. So don;t think I'm rude for not replying to your question. More often than not, it's literally impossible for me to reply to your email due to your account settings. Kerdi-DS. What is it? It's simply a thicker version of plain ole Kerdi. Kerdi is 8-mil, Kerdi-DS comes in at 20-mils thickness. Why is -DS now getting attention here in North America? Because TCNA has changed their recommendations for membranes used in commercial or heavy use steam showers. Recommendations for residential use steam showers have not changed at all. What or who is TCNA? TCNA is the Tile Council of North America. You might see references to TCNA when it comes to installing tile. TCNA publishes "best practice" guidelines for tile installation. You have an organization like TCNA which is fairly nimble when it comes to changing recommendations for installing tile. Then you have "building code", which only gets updated every few years, and updates are subject to influence from various interest groups; be they trade groups (plumbers, electricians, etc) or large corporations that make building materials. TCNA will often make tile/shower/bath recommendations that improve building practices several years ahead of those changes being implemented into state or national building codes. Blah blah blah. So what is this about? We have water barriers, which limit the penetration of liquid water. Then we have vapor barriers, which limit moisture vapor penetration. At a minimum, a water barrier is needed in a shower or tub surround. A more robust barrier, or a vapor barrier, is needed in a steam shower. Protection from vapor penetration has been typically defined by a product's "perm rating". Previously, if a product had a perm rating of less than 1.0, it was considered a vapor barrier. Example, a topical membrane that I use often is Hydroban. Hydroban has a perm rating greater than 1.0, so it can be used as a waterproof membrane in a shower, but it won't suffice as a vapor barrier in a steam shower. A product like RedGard has a perm rating of less than 1.0, so it can be used as a waterproof barrier in a regular shower, or as a vapor barrier in a steam shower. Kerdi? "Regular" Kerdi, the "standard" 8-mil thick Kerdi, has a perm rating of around .90, so it can be used as a water barrier in a regular shower, or as a vapor barrier in a residential steam shower. TCNA has revised their recommendations for vapor barriers used in heavy use or commercial use steam showers. Health clubs, spas, etc. Whereas the old recommendation was to use a material that simply had a perm rating of less than 1.0, for commercial installations like listed above the recommendation has been...

flyleft, send me an email and I'll give you the whole ugly scoop - I don't want to totally derail this thread into something that I could easily see devolving into a political argument. oakleyok says: "I think we all would like a pat on the back every now and then. [...] It hurts when we do a topic asking a simple question or just to show something off, and all we get is criticism." So SAY what you want and don't want. Say something like "Hey, I finally finished such-and-such, and I wanted some pats on the back from my buddies because I worked really hard and my family just doesn't 'get it' how much this project meant to me. I'm not looking for critiques because I like it the way it is, I just want to share what I did." If you want people to critique something but you're feeling extra thin-skinned (not the best time to post, however), tell people to go easy on you. If you only want them to consider one thing, like a lamp, and not pay attention to the rug or the curtains, say so! "I do get my feelings hurt when I do a topic and the replies have nothing to do with what I ask." I'm sure you'll probably take this as "criticism", but you do need to become better acquainted with the concept of "topic drift". Side discussions do occur, especially in long threads, when person A finds something in a post by person B that s/he wants to address even though it isn't what the OP has asked, but it doesn't quite merit starting an entire new thread. And sometimes the whole thread does drift off into an unexpected direction and take on a life of its own... when that happens you either put on the big girl panties and go with it (because frequently when this happens it can be a LOT of fun) or you shrug and abandon the thread as a lost cause, but it's gotta sink in better that it is NOT about YOU personally when every single post in a thread you start isn't about you and your question from beginning to end. It's just the way forums work.