While I'm not a big fan of vinyl tile on a wall...if you like it, that's all that matters.

I devoured this thread for months and finally went to Lowe's to look at these planks. When I first looked at them in the store I thought they looked so fake and cheesy that I almost gave up, but I brought a few home and set them on the floor. They looked good! It seems that most people have good results as long as they follow the directions really carefully and don't use professionals to install the floor. It also seems that the trouble comes when the climate is really hot or humid. But, just to make sure that we weren't the unlucky ones, I installed it in my entryway first to see how it would hold up on our concrete slab. I pulled up sheet vinyl and scraped off the remaining mastic, used the Henry's and it went down and stayed. I am a dog walker/pet sitter and we board dogs, all different kind of dogs, at our house and we needed something durable and easy to clean and this has fit the bill. I installed it in our entire downstairs myself. Everyone loves it and thinks it's either wood or laminate and several neighbors want to put it in themselves. I've noticed vinyl flooring everywhere now, including high end stores. Thanks to everyone for recommending this flooring and for the terrific tips. Here are a few of my own: 1) Definitely prep, prep, prep the floor. I scraped up mastic and glue from the carpet pad. I didn't use adhesive remover because one site I saw said it may soak into the concrete and interfere with adherence. The key is clean, dry and smooth. 2) The instructions on the box and the Novalis website recommend the self-stick tile primer. It is a must - it goes on really thin and dries clear in about half an hour. 3) Take your time when laying the tiles and get them as tight and straight as you can. 4) I found some walnut wood filler that I used in some of the tricky spots and it worked great. 5) Definitely let the planks sit in your house for 48 hours before installation. 6) I ordered OOPS! Painters wipes which Novalis recommends to remove excess adhesive. They also recommend them to remove the white "scratches" which Novalis calls scuff marks. I found that the wipes didn't work on the scuff marks, but time does. They eventually wear away. 7) I didn't use a rolling pin, but did baby steps on the tiles once they were down. There are a few that I missed and they sound funny. I have not had any scratches from dog's nails, but we did have some from broken dishes. It's not as noisy as laminate, but it is hard - almost like walking on concrete. I love this flooring and am so glad to have put it in. I am a middle aged woman and did it by myself. I took my time and did one section at a time and it came out great! Here is a link that might be useful:

I am contemplating doing this for a bathroom and was hoping to see your photos. It would be great if you would specify manufacturer and tile name - e.g. armstrong, sand. Thank you!

At this time the tile is in my son's room getting used to the temperature. I really am not too happy. I am putting the tile on plywood. I was advised at the store to put a glue product on the floor as well as to use the peal and stick product. I could not find information about doing this and felt that the only thing that might stick would be glue, and not the tile. I called Stainmaster, and they said that using another glue with the tiles would void the warranty. I have already spent $400 for one room, and have 2 rooms and the hallway to go. I am still thinking. I wish I had a better answer. Sammy (female)