I have Cahaba Lily and Giant White Spider Lily if you're interested in them to trade for some of your unusual stuff like the one pictured with the purple looking flowers, crocosmia bulbs or rooted brug cuttings. Obviously plants that do well in the desert, indoors or out. Info on Cahaba can be found here: http://nativeplantsfromala.blogspot.com/2010/03/most-beloved-lily-in-alabama-cahaba.html\ They do grow in moving streams and rivers and I've also seen them in a very large pond in a greenhouse in San Francisco but I and others grown them here in the desert in the ground with average water. They usually bloom here in the late summer even in high temps well over 100 deg. The plants are very impressive even when not blooming. These are pretty large bulbs. The giant spider lily grows up to 5 or 6 ft. tall and produces 12 in. wide bloom clusters of 35 to 40 white 5in spider shaped blossoms which are very fragrant. I have rooted pups of these about 6 in. tall. These do best with afternoon shade if grown in high temp areas. Let me know here if you're interested and we'll communicate through e-mail.Thanks!

Oh My goodness...She is so clueless and doesn't know how to do her job and (imho) should be fired! If you mail a Bubble Envelope, regardless of the size or the thickness, it will be charged at the Parcel Rate of $1.22 and up. She said they don't use the device at the counter for measuring a Bubble envelope for thickness, it automatically gets charged the parcel rate. If the Bubble envelope of any size, even empty goes through their machines, it comes out ruined, so they have to put all the bubble envelopes through a different system. She is so wrong! She has been wrong ever since Shape Based pricing went into effect in May 2007...so those employees have ALL been OVERCHARGING now for going on to 4 YEARS! When will this madness end? In order to attempt to get her properly trained (isn't it sad the customers are trying to train USPS supervisors?) I suggest you print out this bulletin...First-Class Mail Fact Sheet At the bottom of it under First-Class Mail Quick Tips, it says"For padded bags (e.g., ReadyPost "cushion mailer"), when the thickness is 3/4" or less and the item is flat-size and somewhat flexible, the item should be classified and priced as a large envelope." Why is that so hard for postal employees to understand? I think even a caveman could understand that! She said that if you put the seeds in a long white envelope, with a small amount of padding in it, and if it is under an ounce, you can put a $.44 cent stamp on it and ask for the 'non machinable' rate. They would charge you another $.20 for that and so the total cost of your envelope would be $.64. hmmm...and we ALL know how well seeds do in regular envelopes with bubble wrap in them. The envelopes end up torn up and the seeds destroyed, if the envelope and seeds even make it to their destination and aren't totally destroyed. What about those who live in the rural and don't have the convenience of getting into the PO very often? What about those that get dropped into the blue mailboxes? Does she think that every envelope is read and sorted by hand so marking something Hand Stamp will be seen? Give me a break. I asked about the little gadget to measure the thickness of the envelope and she said they don't give them out, but they keep one at the counter, but they don't use it to measure bubble envelopes. It seems strange that some of were able to get them from our post offices without any problems. Would you mind posting her name and telephone number here along with her address? I will personally contact her superior from the list at the link below that lists all Vice Presidents and District Managers. It shows the zip code areas that are covered by each one. Imho, she needs to be reported littleonefb, Fran I really don't think anyone associated with the PO is reading this or is attempting to get anything done. I sure wish I could get NBC, CBS, or one of the major networks to pick up on this stealing that has been going on for almost 4 years. A lot of folks should be fired for not knowing how to do their job correctly. In the private sector, a lot of these employees would have been fired long ago. Here is a link that might be useful: USPS Management-it is an 11 page pdf file that will need to load

First you need to upload them to a photo hosting site. I use Photobucket which is free and easy to use. After you have uploaded your pics, copy the HTML code and then paste it into your post:

This FAQ will describe how to post pictures from a photohosting site, from a PDF file, or from some other location on the web. First, though, where are your pictures? If they are on your computer only, you will need to upload them to somewhere on the web for the rest of us to see them. I upload pictures to PhotoBucket, but there are other photo-hosting sites available. For example: Picasa, Flickr, Webshots, etc. Note: Pick a photohosting site that does not require someone to log in to see your pictures. Snapfish, for example, seems to require this, consequently, I do not recommend using Snapfish. (If you know of a way around this, let Buehl know and she will remove this comment!) Overview Open an account w/PhotoBucket or other photo hosting site. Take a picture using a digital camera (or film camera, but get your pictures on a disk when they're developed & download them to your computer) Resize your pictures so they're not too big, generally no more than 400x300 (or 300x400 or 400x400) Resize keeping the same proportions so they don't get distorted...i.e., don't specify a specific size, use %-ages or similar [You can also often resize pictures at your photohosting site, but it's faster to do it on your computer] Upload your pictures to your photo account Find the label that contains the HTML Code link to the picture and copy it Paste it into the thread's "Message" box () Click the "Preview" button. You will now see the picture. ++++++++++++++++++++++++++++++++++++++++++++++++++++ PhotoBucket From the album view, place your cursor over the picture you wish to post and click it. The picture should now appear as an individual picture with the various code options listed on the right side of the page. [Figure 1] Now, place your cursor in the "HTML Code" box and click it. The code should briefly change to "Copied". This means you have copied the code. [Figure 2] Paste the code you just copied into the "Message" box of the post where you want the picture to appear (use the keys) Return to step 7 in the Overview section (where it says to "preview") [As of 12/20/2011] ++++++++++++++++++++++++++++++++++++++++++++++++++++ Picasa In your Picasa album, click on the picture you want to post in your message. This will bring up an individual picture view with things like "Photo information" and "Link to this Photo" on the right side of the page Expand "Link to this photo" by clicking on the arrow. You will now see two links: "Link" and "Embed image". (If you already see these links, then do not click on the arrow as it will close the links.) Below the "Embed image" box, there is another box, "Select size". If you want to post the original (usually larger) size, select "Original size" If you want to post a thumbnail size picture, select "Thumbnail". Note: If you're posting a layout and asking for help, do not use this size...use a size that is easy to read! Now, place your cursor in the "Embed image" box and select the code. Use the keys to "select all" in the box or drag your cursor to select it all manually. Copy the code (use the keys) Paste the code you just copied into the "Message" box of the post where you want the picture to appear (use the keys) Return to step 7 in the Overview section (where it says to "preview") [As of 1/3/2011] ++++++++++++++++++++++++++++++++++++++++++++++++++++ Flickr From the album/photostream page, click the picture you wish to post. The picture will appear in an individual picture view Click "Share This" in the menu that appears above the picture. Click "Grab the HTML/BBCode" From the size drop down menu, select the size you wish to post. Default is "Medium". [Note: There may be more than one "Medium".] When posting a picture, it's usually best to choose a size that's no more than 400 in either direction, smaller is better...as long as it's easy to see/read in the smaller size! For legibility, you may have to post bigger pictures, especially for layouts. Click the "HTML" radio button Now, place your cursor inside the box above the size drop down menu ("Copy and paste the code below:") and select the code. Use the keys to "select all" in the box or drag your cursor to select it all manually. Copy the code (use the keys) Paste the code you just copied into the "Message" box of the post where you want the picture to appear (use the keys) Return to step 7 in the Overview section (where it says to "preview") [As of 1/31/2011] ++++++++++++++++++++++++++++++++++++++++++++++++++++ Elsewhere As with posting pictures from a photohosting site, your pictures must be located somewhere online, not on your local machine. Find the URL of the location of your picture. It will begin with "http : //" [but, without the extra spaces] and most likely end with ".jpg" or ".bmp". (There are other extensions, but these are the most common.) Copy the following into the "Message" box where you want the picture to be: Next, replace the http://www.XXX/image.jpg with the address (URL) of the image. Return to step 7 in the Overview section (where it says to "preview") Note: If using "image code" from somewhere else, you may sometimes see the code with square brackets ([ ]) instead of angle brackets (). You must replace some of the square brackets with angle brackets and delete others for the image code to work. Your goal is to make your "image code" look like the example above. [As of 1/31/2011] ++++++++++++++++++++++++++++++++++++++++++++++++++++ PDF File While you cannot post a PDF file directly into a message, you can convert it to a JPEG (JPG) file using one of the free "PDF Converters" found online. One such converter is the "Neevia Document Converter" at the link below. http://convert.neevia.com/pdfconvert/ Once your file has been converted to a "JPEG" image, save the image on your local machine, upload the picture/image to your photo hosting account, and post the picture/image here. To convert your PDF file and save it to your local machine: Go to one of the free PDF converters found online Follow the directions on the site you are using. This will include specifying the PDF file to convert. Once the PDF file has been converted to an image/picture, save the picture/image to your local machine. The steps to do this depend on your browser: From Firefox: Right click on the image Select "Save Image As..." Save the image on your local machine From Internet Explorer: Right click on the image Select "Save Picture As..." Save the image on your local machine Upload the pictures to the web somewhere (photohosting account such as Photobucket or elsewhere) Now, follow the steps in the Overview section for posting pictures. [As of 1/31/2011]