I would think that any name brand wireless router will work fine. I have a DSL modem supplied by the phone company, and a 4-port Belkin Pre-N wireless router I bought separately a couple of years ago. The incoming signal goes to the modem, and then an Ethernet cable goes to the router. Hard wired devices plug into the ports in the back of the modem via Ethernet cable. My router can handle 4 hard-wired devices, and 32 wireless devices. I have 4 PCs hooked up to it (1 wired, 3 wireless), a Roku box (wireless), and a printer (wireless). The only thing to keep in mind about cable is that speeds can vary depending on how many people in the neighborhood are online at any given time. DSL is a constant speed, and since mine is 3 Mbps, that's enough for me. Have you checked to see whether your DSL supplier can provide a higher speed? Last year, my speed was 1.5 Mbps and I asked if they had anything higher in my area. They said they had 3.0 available for the same price. When I asked why they hadn't just bumped up my speed, they said they were only allowed to change my account if I called to request and authorize it first! I said: Who wouldn't want twice the speed for the same price? They said they just wanted to be sure this was something I wanted! At any rate, 10 seconds later I had twice the speed. Lastly, since you're mixing PCs and Macs on your system, I don't know if that would cause any problems. I have have friends with Macs who visit and they can get on my system (when I give them my security code) with no problem. However, if you are switching providers, you should ask first if there could be any problems.

if the pc has wireless capability built in then all you would need to do is disconnect it from the router by the wire and see if it finds the wireless connection if it has everything it needs (and is enabled) then you should see in the bottom right by the clock where it is trying to connect just like you would on a laptop, you would need to enter your network passphrase into the box that pops up to allow you to connect to your network. I just looked up the specs listed for your p6310 and the networking options for it are as listed Choices: Integrated 10/100 Ethernet, No wireless LAN Modem Premium Wireless-N LAN card Wireless-N LAN card Premium Wireless-N LAN card and Bluetooth(R ) unless you chose the first one that says no wireless then you should have that capability on the pc. I would run a belarc and get all the info specific to your pc you can always print it out and keep it because that info is often needed and having it on hand can come in very handy. That way you know exactly what is in that pc. Belarc If your pc does not have the card for wireless then you can either add a card or get a usb device.

Along with the great advice from here I have to admit a problem and t that nothing is synced to the PC. MS help desk could not work with MS365 and tried to sync new Outlook to iPad and IPhone. They lost my calendars on my Pc. This has been happening over and over at the tier one level. Their supervisors will not let the Tier 1 send me to tier 2 to a dept that specializes in Outlook. I got there the first time - to Microsoft365/ Outlook and had great advice to start me.

mtvhike: The computer will have an ethernet port. I am having my system custom built by my computer guy. Is it just the matter of a connecting a cable?Doesn't my wired computer need to be configured to communicate with the router? I don't have a clue how to do that. That is why I thought wireless would be easier. mikie_gw, beng12. If you say the wireless speed is the same or better, I suppose I could go wireless. So, If I decide to go wired, do I need to set up communication between router and wired computer?