I have pineapple, choc mints and 4 o'clocks Email me Byrdnmber2@yahoo.com

all the seeds i have left are below: Sycamore tree a few melons Purple Columbine (small amount) Okra Cabbage (small amount) Mint thanks, Karen

I made a partition image to recover back to a stable-state, but too squeamish to try newest FF (got burned too many times). Richard, I asked this on the Mint forum, but no response yet. So I'll ask you. Suddenly Mint 17 Qiana is automounting all my partitions at startup where it didn't before??? Not urgent, but rather it NOT do this. Here's /etc/fstab: # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda6 during installation UUID=048e0813-3eb0-4016-9b37-cb9d3ec43738 / ext4 relatime,errors=remount-ro 0 1 /mintswap.swp none swap sw 0 0 And /etc/mtab showing the last three partitions automounting: /dev/sda2 /media/bee/Windows\0407 fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 /dev/sda5 /media/bee/Share fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=512 0 0 /dev/sda3 /media/bee/Linux1 ext4 rw,nosuid,nodev,uhelper=udisks2 0 0 Any idea?

Start with the printer - even if it's a wireless one - plugged into the USB port. You need CUPS installed for printers. It should have installed itself with the rest of the stuff. Go here and install. http://localhost:631/ https://community.linuxmint.com/tutorial/view/194 Scanners usually work with XSane installed. https://sites.google.com/site/easylinuxtipsproject/17