Emma, Since the plants are fairly small and beefsteak tomatoes are so big, I do think I'd remove those first couple of blossoms. I'd be concerned that the development of the fruit this early on such a small plant might keep the plant too small for a long time. Since May is expected to remain cooler than average, I feel like your beefsteaks would have adequate time to bloom and set more fruit before the heat arrives. If you want to give in to temptation and leave the blossoms on the plants, just put a stake in the ground next to the plant and attach the plant to the stake. The stake will hold the plant upright and should prevent the main stem from snapping as the fruit enlarges. I often grow Red Beefsteak as a winter tomato in pots and usually they don't flower until the plant is 12-15" tall. Even at that size, once the energy of the plant is going into fruit production, you can tell the plant remains smaller than other Red Beefsteak plants that haven't set fruit yet. In that sense, the trade off is obvious: if you want earlier fruit, you're giving up some plant size. Generally, though, once the temperatures are consistently warm, the plant that set fruit first will begin catching up in size with bigger plants that set fruit later. Dawn

Thanks for the help. The photo is from my phone camera, so it is not the best. But you can clearly see the lighter, brighter green new leaves (third rhizome from the right) which unfurled from their sheath just in the past 48 hours!!! No kidding. Before that, it looked like the "sheathed" growth of an unopened rubber-tree plant leaf. This is in addition to the other new shoots that have appeared since I got the plant on May 11. This rapid growth ASTONISHED me, as on-line research kept referring to ZZ plants as "very slow growers." (I am joking with my friends that my ZZ plant somehow aspires to be an oak tree, or that atheletes must be sneaking into my home when I am at work and dumping performance enhancing drugs into its pot. LOL.) I watered it on the 18th and watered it again last night, June 1, and am sticking with watering every 2 weeks Should I water more often? The current pot is about 10 inches across. Last night I purchased one that is about twice that size (the largest one I could find with drainage holes) and will re-pot the plant tonight.

Hi, Mikie. Thanks. I guess I will look for a 1.5TB drive (unless I don't find any with very good reviews - I know I've seen some 1 TB drives that get great reviews for around $100). I know I have one open sata port (I did have my computer open last week to take my Tivo original hard drive and copy it to a new 1TB hard drive - with all the snafus this 1- 1/2 hr. project took 8 hours on Saturday - and on and off all Sunday to complete). There is definitely a bay for a second hard drive. I had 2 sata ports but just added an esata cable so I'm using one of those now. I definitely don't have such huge files (maybe 10-15GB at most for a long high-def movie), so I'll look into partitioning the drive (which is an intimidating idea now, but I'll work up to it). I'm not sure what you mean by break-away covers. But this computer comes with an empty slot in front where a firewire port can be. I think this is what you mean by does the faceplate have provisions for it. I've looked through Dell forums. I'm copying the link here: http://en.community.dell.com/forums/t/18748278.aspx?c=us&l=en&cs=04&s=bsd&PageIndex=1 It's amazing that for over a year folks have been trying to add this front firewire port after the face - and most of them cannot get a straight answer from Dell. The variety of responses - including it can't be done, it can only be added to the rear, a suggestion of different needed parts - and then perhaps one answer that seems right - but they got the part number wrong and it took the woman 30 minutes to find the information out. Anyway, I've read through it several times bc. it all seems to unclear. I wish I could have read that several people did the same thing and it worked. But people had different solutions. I think I'll call Dell parts and ask about this one: Part #J4975 ($32.99): * IEEE 1394 PCI Card (all internal cables included) for Dell Inspiron 530 Desktop * One end has FireWire port that will be accessible on front of computer (i.e., via the existing slot) * The other end is the PCI Card (which connects to the motherboard) and also has three additional FireWire ports accessible on back of computer. * Internal cables (included with purchase) connect the two ends. * All four FireWire ports have 6-pin heads. But even that part number is wrong - it's supposed to be Y4975. It sounds like the right thing to me. Then I can just plug in my Lego parts. Dell support is just so uninformed. Back to the hard drive, do I need to get cables as well as the drive? I'm sure I need 1 or 2 cables to connect the drive to my computer - and I'm asking in case that answer is more clear. Thanks. Lynn. PS - I'm not mechanical - but I'm determined to learn.

Well Hey, It may not be "PC" to be happy you don't have to deal with her right issues now, but I totally understand wanting to focus on your pregnancy and keeping the kids happy & well adjusted. I think it's very good she is in rehab getting the help she needs irregardless of how she got there. Hopefully she will be better and focusing on her recovery and co-parenting peacefully when she is released. Have fun with the baby stuff :0)