there are a lot of internet faxing options many are free some charge a fee if the size is large. FaxZero.com do a google search for "internet faxing" what type of internet connections are you using, what type of modem or router? which version of windows? Are you certain there is not a built in modem in your pc already? most have them and they are generally fax modems. You could run belarc advisor on your pc and get a list of what is on it. go to this link, in the tutorial box scroll to item 100 it gives you the directions to how to use fax in windows wizard. Windows XP - Tips for Email, IM and Faxing! Here is a link that might be useful: belarc

Wow, what a lot of really great ideas for me . . .and for all of us here. Thank you!!! I'm following a lot of it and have lost 12 pounds so far. Mainly by cutting out most carbs and white sugar,and as Kelly suggested, doing interval training. I'm also keeping bags of fresh, pre washed baby carrots, baby bell peppers and green beans to munch on when I get hungry. Last night we grilled out burgers and I had mine without the bun. It's getting easier to eat like this and I'm finding the cravings for sweets and cheese are becoming less with each day . . . thankfully! As I mentioned in an earlier post here, I wasn't vastly overweight, just at the tops of what my weight should be for my height and age. Now I'm 12 pounds lighter and my clothes fit so much better! I'd still like to drop another 8 pounds. We fly out this Thursday morning to Palm Beach and then on to the Tampa area 4 days later. I've already eaten dinner and lunches out several times since I started this weight loss drive and have found it pretty easy to eat out healthfully . . . as long as it's in a regular and not a fast food restaurant. Salads with grilled meats, nuts, etc. are my go-to's, with a lite salad dressing on the side; hold the croutons and bread sides (LOL). But, as always, I have to be so careful that "lite" doesn't contain any artificial sweeteners, as I'm extremely allergic to them, especially aspertame/aspartame. So many thanks for all the great, helpful ideas. I'll continue to read them, although I'm not sure if I'm taking my laptop with me to Florida yet. Lynn

So yesterday buddy comes over to look over things with the a/c system and I think we've got things nailed down properly now. The superheat for the given ambient temperature and heat loading from the indoor coil was way off (5F) vs. the 14-15F that it was supposed to be so he had to remove some of the refrigerant (I was quite surprised how little he had to remove to get the superheat up) and we even went as far as measuring the furnace's CFM flow rating using a differential manometer. I'm pushing roughly 1000CFM across a 2 ton coil so which is a tad bit on the high side but my colleauge says it's a margin of safety for the a/c to not freeze over as we have relatively little humidity in the air would means that on the cooler days we wouldn't be heat loading the coil enough which could lead to freeze up. I personally would like to try running my furnace on the lowest speed to get the 855 CFM but I'm not sure how that will affect the superheat. Presumably I would imagine that if a system is charged properly using the superheat method for fixed orifice systems that blower speed shouldn't dramatically impact the superheat values to the point where they're completely out of whack. I would guess that superheat would rise but isn't that sort of a given? I mean hotter days for example would increase loading so therefore superheat should rise no? For the record the pressure reading on the manometer with the furnace on medium low with a 3M 1500 series filter installed has a -0.44 in wg static pressure difference. With no filter the static pressure diff changes to -0.55. Humidity was still somewhat of an issue yesterday night when it was raining but it was quite cool outside. I had to drop the tstat to 21C to force start the a/c on but after just 20 minutes the house was nice and dry and less stuffy. Just for the sake of my understanding does TXV technically do any better or worse job of temperature/humidity control over a fixed orifice system IF both systems were installed properly and charged to near perfection? I have a friend that is looking to install a/c and his contractor insists on having TXV and says that fixed orifice is evil and should never be used. I find that rather extreme to make a claim like that. I've tried to do my own research online and although it's a given that TXV is the way to go I think it has a lot to do with the fact that it will better protect the compressor from liquid flooding + it's more forgiving for techs that do an incorrect charge on the system - critical charge isn't nearly as important on a TXV system vs. fixed orifice. Thanks,

After you find the missing GFCI receptacle, consider changing the wiring and putting GFCI receptacles at each location that requires them. They are only around $10 each, and having the button there to reset them is easier than going to a remote GFCI. All you need to do is find what receptacles are fed from the LOAD side of the first one on the circuit. Install new GFCIs in place of the receptacles, hooking the LINE side of each one up. Go back to the old GFCI receptacle and move the output lines from the LOAD side to the LINE side. Cascading GFCIs (connecting the LINE side of one to the LOAD side of another) is a bad idea.