High-res capable scanner

12 years ago

12 years ago I completed first round of scanning/archiving old family photos. Good job but that equipment long-gone.

Ready for another round upon discovery of previously unknown photo-trove.

Seeking advice for purchase of new scanner capable of high quality/resolution scanning/preservation of these old photos. Not particularly price-sensitive. Just want high quality. Speed would be nice, too.

Computer is late-model iMac.

This post was edited by Gwarstong on Sat, Feb 8, 14 at 14:55

Sort by:Oldest

Comments (6)

Elmer J Fudd
12 years ago
Take a look at Epson's V700 and V750 scanners, they're well regarded.
owbist
12 years ago
I have always assumed most scanners offer various settings for resolution. I generally scan to create a 3 to 5 megabyte file so that photo repairs or editing can be done with a reasonable chance of success.

My current scanner, an HP Scanjet 4890, accepts multiple photos and scans each individually as long as a quarter inch separation is maintained but again I think many modern scanners offer this neat feature.
Related Discussions
Which Floribunda for high temps. and high humidity?
Q
Comments (33)
I spray with Honor Guard, which is a cheaper version of Banner Maxx. It is a version of what is in Bayer Disease Control,only lasts longer - up to three weeks. I get it from Rosemania.com. It is pricey, but lasts a long time, as you only use a little of it at a time. I also use Response with it, which is a solution of seaweed, and I also use Indicate 5 - a spreader sticker. Oh, and I use Messenger, too, but spray it separately. I strongly recommend getting a chemical mask - not too expensive at one of the box stores, along with goggles. This will prevent inhaling chemicals, plus protect against what dallasguy got - a faceful! I use the mask with anything I don't want to inhale - including the organic fertilizers which have powdery ingredients like alfalfa. It is just being smart - if you smell it, you are inhaling it. I always wonder why pest control men go around spraying without masks and say that to them. Of course, they just shrug their shoulders. Also, wear long sleeves, a hat, long pants and chemical resistant gloves. I use the disposables - also at the box stores. After you spray, wash these clothes separately from the others, and, of course, take a shower. With a small garden, you can use Bayer All-in-One poured in the ground, and I know a lot of people who do it successfully. But - even when mixing that up, I would use my mask. Again - it's just common sense to me. I have a lot of hybrid teas in addition to floribundas, shrubs, minis and climbers. In the summer, their bloom size decreases, but revive in the fall with huge blooms - often into December. The floribundas bloom more in the summer and size of blooms seems the same. Anyway, growing roses in blackspot prone areas is a challenge, but the spectacular blooms and long season makes it worth it to me.
...See More
Questions re Windows 8
Q
Comments (5)
So you could try Mikie's idea of installing the Scanner on your Win 8 machine to see if it works so you only need one computer. If you old computer is a factory build you could not use your XP operating system in the new case because it is tied to the motherboard on the old machine. You can use the Easy file transfer to move all your personal stuff to the new confuser, works great and very simple to use. If the scanner works on the new computer and you have successfully transferred all your stuff you could then possibly install the drive from the old computer, reformat it and then do as you wish with it. I say possibly because the old computer may have an IDE drive where the new one will have a SATA drive. Being this far into SATA use I doubt your new computer will have an IDE connector on the motherboard. To see what hard drive is in the old machine remove the side panel and look. The newer SATA drives are connected to the motherboard and power supply with cables about 3/8 inch wide where the older hard drives has a data ribbon almost 2 inches wide and the power was 4 wires into an almost one inch wide plug.
...See More
Scanner ?'s
Q
Comments (7)
Mark until my latest scanner I nave never owned an expensive one. I bought one for about $100 many years ago after I had a couple of scans done at a local store. At $10 for one scan and $8 for others done at the same time I reasoned I only needed to do 12 scans and I was in pocket. Others have commented here on scanning slides with success. When I did it the machine (borrowed) was quite old and the results were reasonable at best. Be sure to practise well before the final scans. I had 14 reels of 120 slides to scan so there was little enjoyment and each needed about 3 minutes to complete the input and scan. My current scanner is an HP Scanjet 4890 which at the time of purchase was about $300 Canadian but it was given to me by my daughter who decided she had no use for it :~) Previously I had a Canon and one other probably a Visioneer since they have been around seemingly forever.
...See More
calling all capable layout gurus!
Q
Comments (22)
Hi, X Glad you are back. I played with your new graph a bit and still can't make it work for me with the DR at the top. Disadvantages: 1. Go through kitchen to reach dead end DR. 2. Not enough clearance around table. 3. I would find the room, even with the windows, enclosed feeling. I do still like Lavender Lass's sketch. But it seems to me that you would not often use the keeping room. Again, you have to walk through the kitchen to reach a dead end space. But it is charming. So I went back to my first plan and played a bit. Yes, I KNOW you don't want a prep sink. I just can't design this iteration of the kitchen without it. So convenient to the DR table and Fireplace sitting area for drinks. So nice for prepping on the island. But that's OK. Go ahead. Ignore me. No prep sink. See if I care. ;o( Considerations: 1. The island is wide--3 feet. Not needed for space, but it seemed to me to ''want'' to be that wide. I wish mine were! 2. I didn't put seating at the island because you have seating so handy at the corner window seat, DR table and the Fireplace seating. 3. This assumes you will eat all meals at the DR table. Not sure if that is your plan. 4. Not sure of your DR table size. This shows 4 x 6 feet, which is a bit tight in the area around it. Suggestion: Have the fireplace chairs on wheels so they can be slid around easily as needed. Anyway, a slightly different arrangement to add to your growing pile of considerations. Hope you are having fun! Sandra
...See More
Elmer J Fudd
12 years ago
owbist, that model wasn't too well rated by PC Mag. It's an oldie too.

OP was asking for a high res one without price sensitivity, maybe my observation is higher than what was desired.

Here is a link that might be useful: 4890 review
owbist
12 years ago
Ah, Snidely the beauty of this scanner was the fact it was free :~)

The sad part is HP refuse to allow it to be installed on my Windows 8 confuser. I have recently acquired (also free and a neat looking machine) a Shuttle computer with XP on. Slower than molasses but capable for the job as I have a few more photos needing scanning.
grandms
12 years ago
I have an older model Epson, the Perfection 3170, which has the capability of scanning negatives and slides. I bought it directly from Epson (refurbished) at a very good price. I still have not scanned the negatives and slides I bought it for, and now the latest drivers available are for Windows 7. I did find out that it can be installed in "compatibility mode" on Windows 8. I've been waffling about a new computer and finally had myself convinced to go ahead with Windows 8. Now, I'm not so sure of what to do. I should have done this job several years ago, and life is getting away from me. I'm sure I'll leave this life with lots of unfinished projects.

Can someone explain whether "compatibility mode" would limit any functions of the scanner if installed on Windows 8?

I've read some rumors of Windows 9 making an appearance by Christmas time this year. Anyone with any knowledge of this? This just adds to my confusion.

Here are the specs of the computer I'm considering:
Ã¢ÂÂ¢ Windows 8.1 64
Ã¢ÂÂ¢ 4th generation IntelÃÂ® CoreÃ¢ÂÂ¢ i7-4770 processor quad-core[3.4GHz,8MB Shared Cache]
Ã¢ÂÂ¢ Intel HD Graphics [DVI-I, DVI-D]
Ã¢ÂÂ¢ 12GB DDR3-1600MHz [2 DIMM ]
Ã¢ÂÂ¢ 2TB 7200 RPM SATA Hard Drive
Ã¢ÂÂ¢ No Secondary HDD
Ã¢ÂÂ¢ Microsoft Office Trial
Ã¢ÂÂ¢ Security software trial
Ã¢ÂÂ¢ SuperMulti DVD Burner
Ã¢ÂÂ¢ 15-in-1 Multi-slot Media Card Reader, 4 USB Ports (Front/Top), Audio [Front 2USB2.0, Top 2USB3.0]
Ã¢ÂÂ¢ No TV Tuner Card
Ã¢ÂÂ¢ Integrated Sound, Envy Audio; Beats Audio
Ã¢ÂÂ¢ HP USB keyboard and optical mouse with volume control
Ã¢ÂÂ¢ Wireless-N LAN card and BluetoothÃÂ®(1x1)
Ã¢ÂÂ¢ 460W Power supply

Apologize for hijacking this thread. However, I think Epson makes some great peripherals.
kudzu9
12 years ago
The Canon CanoScan 9000F works really well. Unfortunately, they have raised the price a lot. I got mine a year ago for $140, and now they are $400, but you can see that it gets excellent reviews. There is also a newer model called the CanoScan 9000F MKII, which is more reasonably priced at about $170; it gets good reviews, but I don't know how it compares to the original.

Here is a link that might be useful: Canon Scanner

High-res capable scanner

Comments (6)

Elmer J Fudd

owbist

Related Discussions

Elmer J Fudd

owbist

grandms

kudzu9

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US