I paid 29.00 for my plain white porcelain undermount sink. It came with the prefab granite top I purchased. Mine doesn't attach at the faucets- it doesn't sit back that far. It did come with the other holes pre drilled and the one for overflow already has a chrome ring around it. It's great and I'm very happy with it and my granite.

$86; holes were drilled in granite slab by granite installer and cost was included in granite fabrication.

Blue

We got two Toto rectangular undermounts with sanagloss - super high-end at $139 each. We do not have/need holes for faucets because we're going with wall-mounted.

mid 300's for a ticor ss 30" wide single bowl (zero radius, rear draining). it's a copycat off the blanco which is close to $1K(!).

sorry, thought i was still in the kitchen forum!!

There are three separate items here. There is the sink itself, which can be free in some fabricators promos, or it can cost pwards of 1K if you want something unique and hand crafted. Then there is the stone slab material, and the fabrication of that material. Some fabricators will quote you separate prices on the stone and then the fabrication labor and some will only quote you a price of the fabricated stone with the labor accounted for in that price. Every fabrication place is different and charges differently, so you want to get a price for the overall job to be able to compare different fabricators equally. Don't get locked into the fact that you might be getting a "free" sink either. Free gets paid for somewhere. My stone fabricators will do an unpolished cutout free of charge. That allows you to use the topmount sink of your choice. If you want undermount, that's an additional $220 for them to polish the edge of the cutout and mount the sink of your choice and included up to 3 faucet holes. The sink (or faucet) itself is not sourced through them and you may choose any sink (or faucet) on the market that will fit your vanity base. The most common undermount sink that I sell is the Kohler Caxton as it is an inexpensive choice by a major manufacturer who is sure to still be around and making that sink if the customer ever has a problem down the road and needs warranty support.

We're getting undermount sinks, the cost for fabrication is 100 for each sink, we have to buy the sinks, and our fabricator offers them at discount for 50.00 each. Like Live Wire Oak explained, if we were going with self rimming sinks, there would be no charge for the cut out (since it stays unpolished) Also no charge for the sink holes.

We paid $50/sqft for our bathroom vanities (remnant price), including template, cutouts, and install. The undermount sinks were an additional 60 bucks a piece.

About $40 each. We supplied them to the granite fabricator, who cut the holes for sinks and faucets. Don't know the price breakout as the granite was a package deal.