I'm pretty picky and I honestly can't see anything worth redoing. If it's off, it's only off by a hair, unless the picture isn't accurately duplicating what you see IRL. Truthfully, though, it does annoy me, too, when things can be lined up perfectly and they aren't. I mean, why not make it perfect if you can? But most people don't think that way so if you are going to have others do things for you, you have to get over the small stuff and this sure looks really, really small.

Howdy. Every time I think about sitting down and providing an update, I get upset all over again...just like every time I walk into my kitchen (many, many times a day), the awful feelings churn up. I don't consider myself to be someone who needs to LOVE her kitchen. But at this point, I have nothing but negative feelings (emotionally and physically, really) every time I lay eyes on my counters. So, consider this as follow-up, more venting...what, closure? Maybe an education for anyone else going through this? I glanced at the date stamp on my initial post: what a way to mark this one-year anniversary. I'll try to stay as focused as possible. Last autumn, with all the small claims paperwork filed, both parties waited for a mediation date to be set (which likely wouldn't happen til after the first of the year). In Texas, a mediation session is required for small claims cases. In December, I called the precinct to double check and make sure the hearing didn't get pushed forward: I was shocked to hear that the fabricator had filed a countersuit in October! Part of the shock was due to my never having even been notified...very odd business, I thought. Up til then, their attorney emailed and snail-mailed every scrap of formage and documentation. We've said it and heard it time and again on these forums: give the company an opportunity to 'make it right'. I can't remembered if I covered this here already, but after they honed my tops, I was left with grit all over. We went back and forth, the fabricator not sure what happened...got to a point where he asked me to do internet research, contact his tech rep at MIA, post the problem with the pros at the Stone Fabricators Alliance forum, etc. I was told by this company that, don't worry, at the end of the day, they were going to provide me with smooth (non-gritty) and sealed tops. Several trips back and forth to re-hone on site. They finally switched brushes/heads and 'leathered' on-site (after asking me to provide and put up plastic sheeting to isolate the dust.) The grit resolved, but the leathering was very uneven. Shiny spots were mixed with dull spots; and there were grinder arc marks that they couldn't figure out how to get rid of. I told them it was good enough. The next several weeks were spent helping them figure out the right type of sealer to use. Their go-to didn't work, so again it was on me to find a sealer that worked. OK, so, the counter suit: not only did they fabricate two phony invoices for the hours and trips spent getting rid of the grit AND properly sealing the counters (each time, I stood side-by-side with the owner, helping him with the sealer applications -- sometimes timing, other times helping scrub and rinse with water during the stripping process), they claimed that I was more than 90 days delinquent paying these two invoices...to the tune of ~ $4,000 more (ballpark...can't remember exactly now). PREPOSTEROUS!!!! I knew this countersuit wouldn't hold any water: history would show that I always paid my invoices within 24-72 hours. And they could never prove that I received these two phony invoices: all invoices were emailed to me, and I can guarantee they could never have come up with original emails proving I was invoiced. During all this time, I sat down with my attorney acquaintance and laid everything out. He reminded me of one very important thing: at least in TX, small claims judgements are not binding. He felt I had a rock solid case not only to prove my case, but also to have the countersuit quickly dismissed. However, even if the judgement went in my favor, there's no guaranteeing I'd collect a dime. Up until the time I stumbled upon the countersuit, I somehow (naively?) had faith in the system, and felt that if I won the case, that would be that. Seeing what low and underhanded lengths this company and their attorney stooped with the countersuit, I started to doubt that they would honor a judgement. My attorney friend says these are the types of companies/cases he takes, and he spends months and years chasing companies just like this. (Going to stop here and post...back in a sec with the next part.)

Thabks for the reply. Dissapointing. Is the problem that it was manufactured incorrectly? Why do some sinks crack at the seam and others don't or is this a feature of integrated sinks. I know I'm in denial but in addition to the whole vanity, we have built in cabinet and seat with same stone and it would all have to be replaced ad I doubt I'd find the same stone to just fix the sink.

I don't think there is any issue if you have the seam at the back of the farmhouse sink, but I'd insist on seeing how they plan to join the two pieces and how the pattern will fall.