If you bought your BS 30 inch range from Costco you should know this. Three years ago, disappointed that the only option offered was a new oven door at over $1,000CA I demanded a full refund from Costco. This was 13 years after purchase. My case was two-fold. First, customer service. Costco knew the names of everyone, probably in the low thousands, of members who purchased the range. When hinge problems emerged they did nothing to notify the buyers and consequently, we missed the period where BS was supplying new doors at no cost. Further problems emerge because front line Costco staff have no authority to provide solutions and great difficulty getting the ear of those with that authority. After months I had logged the names of 11 agents. I was then able to tell their supervisor, who I met at last, that they were beginning to feel like family. Pro hint. Derision can be effective. Second. Misrepresentation. Costco's sale literature shows 2 cosmetic compromises, the flimsy backsplash and the stainless steel insert replacing the center top castings. There were no other amendments to the otherwise standard BS product description. I did eventually buy a replacement range, a real BS and while doing the propane conversion had both stoves apart and side by side. Here I could observe that instead of individual spark igniters, the Costco version had a single igniter that sparked all 4 burners. The entire front-mounted burner control knobs were also downgraded to slightly smaller, far less precise units. Possibly unrelated but the broiler ignition on the Costco range failed rather quickly. All BS tech advice could offer was cutting away the guard on the glow-stick. In any event Costco eventually got worn down and I was given a full refund and deservedly so. It was a mystery to me that Costco could retail a CA$4000 range for CA$1900. Mystery solved. And BTW my CA$500 replacement bought from folks who had paid CA$6000 has worked beautifully for the last 3 years. It too had oven door issues and I received uninstalled replacement hinges along with the stove. the hinges work but the door is damaged and fragile from the sticking issue. My advice for anyone owning a big gas oven is this. Add something like a Miele 24 inch electric wall oven and you'll use it almost all the time.

The cabinet brand is candlelight, the hinges say "blum". It seems that they can be adjusted to make doors even, etc, but maybe they can't adjust to make them high enough, not sure. Someone from the cabinet co is coming over today, so if there is a way to adjust I'm sure we'll find out how. If not, I'm going to insist that they send new doors or something. It just makes them look wrong. The contractor had already called the rep to come over before I even saw anything, so hopefully it will be taken care of.

I am, also agree with repairman, because it is gone probably. Better to buy a new one. I am using a a pre-owned The IKICH Portable Ice Maker Machine has been serving me well. A used item I've had good luck with the IKICH portable ice maker. With this machine, I don't need to give it a lot of room because it can fit right into your workspace or kitchen countertop at home. You'll have a quick and portable ice-making solution after the machine is installed, which can generate ice in 8 minutes. Nine bullet-shaped ice cubes can be produced at once by the IKICH portable ice maker machine. There are two ice cube sizes available. Within 24 hours, the ice maker generates 12 kilograms of ice from the 2-liter tank. No connection to the water supply is necessary. It is one of the most dependable portable ice makers despite its low volume capacity and manual refill option. The IKICH Portable Ice Maker Machine is backed by a two-year warranty, providing you with adequate purchasing protection for this home-based product.

That sounds like a pretty different issue from mine. My garage never opens or closes on it's own (without pressing anything). I can also manually force the door shut simply by holding the button in until it's fully closed. That's what I've been doing for months actually. I also the same closing issue whether it's the button on the wall, the keypad outside, the liftmaster car remote, or my vehicles built in remote. So that tells me it's something with the motor/board, track, or safety sensors. The blinking light is indicative of a safety sensor issue, but they seem to be perfectly aligned.