johndeere, That's pretty impressive that you have all that stuff in a 120 sqft shed. I just got mine a month ago so I'm still filling it up. Right now I have my JD225, the 30" tiller, 10 cu ft cart, 175lb spreader, 7 bushel bagger, dozer blade, table saw (that can probably go back to my garage), Karcher/Honda 3000psi pressure washer, 21" Craftsman/Honda push mower, Husqvarna 455 Rancher w/20" bar, Husqvarna 323 trimmer with manual feed head (I hate those bump feed jobs), shovels, axes, rakes, loppers, a fiberglass-handled Vaughn claw hammer, two bags of Quickrete, a half bag of 10-10-10, and my John Deere licensed sprinkler that drives around the yard using the hose as a guide. I built a 4x10 loft in the back, 5' off the floor, which will soon shelve Rubbermaid bins of junk my wife says we need to keep for God knows what reason, currently taking up precious space in the frog (finished room over garage). And underneath that loft is 1,000 board feet of black cherry in 8' lengths neatly stacked with spacers to dry, awaiting some project down the road. I keep all my mechanics tools in the garage. Even though I have a deadbolt on the shed, I'd rather have the Craftsman rollaway and powertools in the garage. I don't think I can fit another tractor in there, but I definitely like the idea of building another garage so I can use my current garage for a workshop (without having to pull the vehicles out and then try not to get sawdust everywhere).

x300 is a good machine but as marine guy and others have stated in past posts unless you are dead set on brand new get a used gt 225 or 235,and you will not need a machine for 20 years if cared for and given some tlc. I found a used 2005 gt 235 for 2300.00 with 25 hours on it. It is more machine than I need but use of tiller , heavy duty transmission , blading ect.. it is so worth having more than you need than having not enough . I went from lt 155 which some have said is a close comparison to x 300 i dont completely agree with that but boy what a huuuge differance between the lt and gt I can only imagine the 300 is a better machine than an lt though twin cyl. heavier frame, smoother, quiter ride. either way you go enjoy your new deere !!! maintain it and it will run forever. p.s. marine guy might have an attitude but he knows his s#@t every post I have read has been dead on. GT's rule !!!!!!!!!

crabjoe, My beef with Sears IS the service, or lack of, at my specific location and with my specific Sears. I did not take the position that the Sears DG6500 was inferior to a JD L&G tractor other than mentioning a couple "cheap down" concessions that Sears took to make their price very appealing. I was not aware or informed at the time of purchase that no pre-delivery service and poor QC, again Sears fault not the tractor's, was among the "cheap down" concessions that Sears chose. I did point out that John Deere, the manufacturer, mandates that all L&G tractors sold by mass marketers such as HD or Lowe's will have a proper pre-delivery service performed by an authorized JD L&G dealer. That benefits both the end user and undoubtedly cuts down on warranty claims and product returns. Sears uses a different business model and now I know that. I bought the DGS6500 because on paper the feature set was unmatched at the price and that fact is still true. I did expect to receive the tractor in operating condition. Not everyone has the luxury of being in between two or three Sears to compare or within easy driving distance of two well staffed Sears service centers and those who do are truly fortunate. In my area among the many Sears on-site techs there is only one that is qualified to repair tractors and he covers about a third of a large state. He is severely overworked hence the three week wait to get him out for the initial diagnostic call and then the wait to have him return after the parts he ordered show up. This information was not known to me until AFTER I returned the tractor. Some weeks later I ran into that tractor tech and he was indeed knowledgeable and a nice guy. He told me that over 90% of his service calls are to remedy problems that should have been caught at the factory or would have been caught in a pre-delivery service and that most of the time parts are required and that means a longer wait for the customer and a return service call for him. I sympathize with the one tractor tech who is overworked but that is not the customer's problem.

There are times when I seek out the little guy, and times when I buy stuff at box stores. I try to keep it in balance. Sometimes Goliath surprises you with his compassion, and other times David pisses you off with his arrogance. Here are a few examples: 1)Weed wacker--good dealer purchase Had my eye on a Husqy 223L trimmer, which Lowe's had for $299. We have a small engine shop here in Jacksonville (Cooper's), which primarly sells Snapper, Husqvarna and Stihl. I figured I'd stop in, and if he were even within 10% of the Lowe's price, I'd buy from him. Turns out he undercut Lowe's by $30, and he now contiunes to get my business. He insisted that I take it outside and test it out--otherwise how would his trimming get done? I always support the local little guy when I can, of course, in Carolina, Lowe's is the local little guy compared to Home Depot. 2)Used John Deere--sour dealer purchase I recently "brokered" a purchase of a JD 265 from a reputable JD dealer (Bombergers Store, Litiz, PA) for my Dad, from three states away. It was a trade-in which was still configured for snow removal. We bought it for just over $1500, with plow, deck and snowblower (installed). My father has never owned a large garden tractor, and is not familiar with the lift system. I knew he'd be excited to take his new tractor up to the property and start mowing as soon as he got his hands on it. Since I obviously wouldn't be there to help him out, I didn't want him to have to skin his knuckles and get his blood pressure up swapping the blower for the deck before he got to use it, so I asked Bombergers if they could swap out the deck before the pickup time five days away. The salesman's response was "For the price this thing's going out of here, I'm not really interested in swapping the deck. We've got a lot to do for OUR customers this week. I'm mechanically inclined and it would take me at least an hour." So I asked him if I were to pay for the full $180 servicing (which includes leveling the deck), would he swap the implements out then? He agreed. Then he called me Friday at 5pm (tractor to be picked up Saturday at 10am) and said they did the service but left the blower on because they decided that wasn't worth their time. Getting really tired of being jerked around, I asked how much to swap the blower for the deck? $100. Fine. So the next morning my Dad picked up the mower, ready to cut, oblivious to the hassle and mugging I'd endured. That weekend I did some grading for my neighbor, going from deck->tiller->blade->deck in a single day, no swap taking more than 10 minutes (same system). The more I thought about it, the more I fumed. By Bomberger's standards, I'd just done $300 worth of labor just in configuring the tractor. I sent the manager an email saying they have one day to get back to me via phone or email to explain the circus that was the previous week--specifically why they didn't do a job we'd agreed on before calling me on a Friday night and demanding another Franklin note--or they could expect negative feedback on eBay. The negative feedback threat was a bluff, actually. Swapping the equipment wasn't in the terms of the sale, so I couldn't ethically destroy their 100% positive feedback for being A-holes for a somewhat separate issue. Monday morning the manager emailed me his phone number, and said he would like to refund the $100 deck swap fee, as he agreed this was outrageous. He also politely scolded me for implying in my email that his techicians were less than skilled mechanics. He's right; I don't know them. For all I know, each of them may have completed the 8th grade with a passing average. The whole time they kept referring to what they do for "their" customers. I'm assuming they mean the people who buy new $7,000 mowers, because apparently spending $1,800 on used equipment doesn't get you into the club. My Dad lives an hour away and could very well have become one of the elite few "Bombergers Customers." But after hearing about what I'd went through to get them to swap the attachments, it's a fair bet he will never seek that status. 3) Table saw--good box store purchase The Craftsman folding table saw I've had my eye on for a year, with sliding miter and built-in router table (#21829) finally went on sale this weekend, from $450 to $350. After reading the Sears Ad in the Sunday paper I grabbed my two year old and went for a ride. As I went to check out, I noticed a ball-bearing chest (#61805/61809) set also heavily discounted. Unfortunately, due to the hot price, they had sold out of them. "Okay, so how much for that one?" The sales guy looked it over... "How's 15% off sound?" Sounds like I'm going to need to stow the third row seat to make it home... Since my credit card doubles the mfg warranty, I wanted to pay for the saw first, then pay cash for the chest. "Craftsman club member? 10% off today." Nope. So he pulls his card out of his pocket and discounts the chest another 10%. With the chest receipt came a $25 off coupon off my next purchase, which was the table saw... 20 seconds later. Once again he swiped his club card and knocked another 10% off. As I pulled out of the parking lot, I had a brand new $450 table saw on sale for $350, club discounted to $292; and a $450 tool chest combo, on sale for $370, floor model discounted to $277. Granted I didn't plan on spending $600 two weeks before we go on vacation, and I now will have to go without the 15gal tow-behind sprayer I'd planned to buy this season, but it wasn't a bad day for the consumer. The big corporations might not give a hoot about us, but every now and then you'll find someone working the register who does.