I should amend my comment to add that the other factor determining length of watering will also be your soil type - loam, sandy, or clay (or some combination). Forgot to mention that rather key piece of info :-) Even though my soil is mainly DG, it is dense in spots, so some of my trees will fill up quicker (not soaking in as quickly), and other trees look like the wells are not as full, but in fact it's more due to how quickly the water is percolating right in that spot, and not a factor of how much water it's receiving. Bottom line for you - water, water, more water! Nice big well, fill it with compost and worm castings, keeping away from the trunk, then set up your watering regime to make sure you're giving this tree enough water. And, you might consider topping some of the taller branches as well. Will help your tree recover, and will also encourage more lower growth where it's easier to pick. Patty S.

Where do you live?

Just plug it and dump some CLR in there. Will be like brand new.

You will need to bring in your flooring samples into the space. Put down a white bed sheet underneath the samples and leave them on the floor. You will assess the floor samples THROUGHOUT the 5 lighting situations. If you see the same clash as what you currently have them toss that sample to the curb. You are the one who sees the clash. You have to be happy with the floors. A white washed plank might do it for you...but again the cherry dining set is the odd man out in your home's decor. Be aware the dining set is going to be an issue (as it currently is now). I suggest you remove the cherry set until you have found a decent floor option. In fact, I would remove it for now and reassess the clash during the morning hours. Just in case you are seeing a clash BECAUSE of the cherry. It is a simple thing that can remove ONE MORE variable. Think of it as a science experiment (which it is...remember primary school when we found about about light and prisms etc?...that was 'science class' for the day). Remove all the variables until you are working with only one. Then add in variables until you find the 'issue'. Technically your issue is the paint. But you want to keep it so we are trying to find a way to help you. Ideally you would repaint. It is the paint that is throwing the blue/gray...not the floors.